Design of a test-rig for measuring the performance of different types of RV reducers
-
摘要: 传统RV减速器试验台通常只能完成一种型号RV减速器的性能测试,造成了极大的浪费。为克服上述不足,提出一种可测试不同型号RV减速器性能试验台的设计方法。首先,介绍了RV减速器试验台的组成,完成试验台设计方法的理论分析。其次,建立了试验台的三维模型,完成不同型号RV减速器在试验台上的装配和运动分析。最后,完成了试验台零部件的加工、安装和试验,验证了所提方法的可行性。Abstract: Traditional RV reducer test-rig can only complete the performance test of one type of RV reducer, which causes great waste. In order to overcome the above shortcoming, a design method of test-rig of RV reducer with replaceable types is proposed. Firstly, the composition of RV reducer test-rig is introduced and the theoretical analysis of test-rig design of RV reducer with replaceable types is completed. Secondly, the three-dimensional models of test-rig of RV reducer with replaceable types are established and the assembly and motion analysis of different RV reducer types on the test-rig are completed. Finally, the actual machining of components and parts, installation of test-rig of RV reducer with replaceable types and test measurement are completed, which verifies the feasibility of the proposed method.
-
Key words:
- RV reducer /
- test-rig /
- replaceable types
-
表 1 RV减速器试验台主要零部件以及RV减速器(RV-20E和RV-40E)的三维模型
1 2 3 4 5 6 7 8 9 10 11 12 13 14 -
[1] 张杰, 万化云, 史翔, 等. RV减速器回差分析与实验测试研究[J]. 机械传动, 2017, 41(6): 134-142. https://www.cnki.com.cn/Article/CJFDTOTAL-JXCD201706025.htm [2] 陈李果, 彭鹏, 汪久根, 等. RV减速器试验装置研制及测试分析[J]. 机械传动, 2017, 41(11): 92-96. https://www.cnki.com.cn/Article/CJFDTOTAL-JXCD201711018.htm [3] 陈李果, 汪久根, 张靖, 等. RV减速器振动测试与信号分析[J]. 机械传动, 2018, 42(3): 80-84. [4] 仉喜洋, 堪志新, 徐志强. RV减速器综合参数测量方法研究[J]. 机械传动, 2018, 42(5): 53-56. https://www.cnki.com.cn/Article/CJFDTOTAL-JXCD201805010.htm [5] 王辉, 石照耀, 林家春, 等. 机器人用RV减速器多齿啮合特性研究[J]. 哈尔滨工程大学学报, 2020(2): 227-234. https://www.cnki.com.cn/Article/CJFDTOTAL-HEBG202002011.htm [6] 王瑞欣, 刘红旗, 张敬彩, 等. 机器人用RV减速器合性能试验台技术研究与开发[J]. 机械传动, 2018, 42(12): 143-145. [7] 马渝翔, 张向慧, 弓宇, 等. 基于虚拟仪器的减速器试验台测控系统设计[J]. 制造技术与机床, 2017(1): 98-102. [8] 关通, 徐宏海, 谢雄伟, 等. 高精密RV减速器传动效率测试与分析[J]. 机械传动, 2019, 43(5): 106-109. https://www.cnki.com.cn/Article/CJFDTOTAL-JXCD201905021.htm [9] 王成, 魏子尧, 崔焕勇, 等. 齿轮传动效率测定试验装置的研究进展[J]. 制造技术与机床, 2013(11): 45-50. https://www.cnki.com.cn/Article/CJFDTOTAL-ZJYC201311016.htm