基于在机测量的大型壳体零件边线特征加工补偿方法研究

Study on machining compensation method for large-scale shell part edge features based on on-machine measurement

  • 摘要: 针对大型壳体边线数控加工过程中几何误差累积引发的加工精度偏低的问题,提出一种基于在机测量的边线特征自适应补偿加工方法。采用弧长-弦高混合约束采样获取原始测点,将测量点布置于边线相邻面以保证测量精度,通过在机测量采集边线偏差数据,对边线组参数重映射,结合三次样条插值构建“参数-偏差”映射模型,实现刀路动态补偿修正。经壳体边线加工试验验证,补偿后窄边宽度偏差介于0~+0.038 8mm,满足0~+0.05mm公差要求。结果表明,该方法可有效提升大型壳体零件边线特征加工精度与尺寸一致性,满足精密加工公差要求。

     

    Abstract: Aiming at the problem of low machining accuracy caused by geometric error accumulation in the edge feature NC machining of large-scale shell parts, an adaptive compensation machining method for edge feature based on on-machine measurement is proposed. The original measuring points are obtained by arc-length and chord-height hybrid constrained sampling, and the measuring points are arranged on the adjacent surfaces of the edge to ensure measurement accuracy. The edge deviation data are collected through on-machine measurement, and the parameter remapping of the edge group is carried out. Combined with cubic spline interpolation, a "parameter-deviation" mapping model is constructed to realize the dynamic compensation and correction of the tool path. Verified by the shell edge machining experiment, the width deviation of the narrow edge after compensation ranges from 0 mm to 0.0388 mm, which meets the tolerance requirement of 0 mm to 0.05 mm. The results show that the proposed method can effectively improve the machining accuracy and dimensional consistency of edge features of large-scale shell parts and meet the tolerance requirements of precision machining.

     

/

返回文章
返回