超精密车床动力学响应分析与隔振性能试验研究

Dynamic response analysis and vibration isolation performance experimental study of ultra-precision lathe

  • 摘要: 针对超精密车床空气弹簧支撑及气液静压支撑结构易受振动影响的问题,建立包含空气弹簧、液体静压导轨、气体静压主轴的三级支撑整机有限元动力学模型,开展模态仿真、模态试验、切削力谐响应仿真与空气弹簧隔振试验研究。模态仿真结果表明,除运动轴方向产生的3阶零频自由模态外,4至9阶为空气弹簧引发的整机六自由度刚体模态,第10阶起出现导轨气液结合面弹性模态;为进一步验证仿真精度,采用力锤法完成整机模态测试,并通过MAC 矩阵验证了各阶振型的独立性。以模态分析结果为基础,结合切削力实际测试,计入Rayleigh阻尼与结合面单元阻尼开展谐响应分析,结果表明90.1 Hz处径向振动峰值达441.4 nm。同时,为验证空气弹簧的实际作用,开展隔振性能试验研究,试验表明其有效隔振频段为9~70 Hz,可抑制地面中低频振动传递。综上,研究揭示了超精密车床刚体模态、弹性模态的分布规律与振动传递特性,为机床结构刚度优化、隔振系统匹配提供理论与试验依据。

     

    Abstract: To address the issue that the air-spring supports and the aerostatic and hydrostatic support structures of ultra-precision lathes are susceptible to vibration, a three-level supported whole-machine finite element dynamic model comprising an air spring, a liquid hydrostatic guideway, and an aerostatic spindle was established. Modal simulation, modal testing, cutting-force harmonic response simulation, and air-spring vibration isolation experiments were carried out. The modal simulation results show that, apart from the three zero-frequency free modes along the motion axis directions, modes 4 to 9 are the six-degree-of-freedom rigid body modes of the whole machine induced by the air springs, and that elastic modes of the gas-liquid interface of the guideway appear from the 10th mode onward. To further verify the simulation accuracy, modal testing of the whole machine was conducted using the impact hammer method, and the independence of each mode shape was verified through the modal assurance criterion (MAC) matrix. Based on the modal analysis results and actual cutting force measurements, harmonic response analysis was conducted by incorporating Rayleigh damping and interface element damping, and the results show that the radial vibration peak reaches 441.4 nm at 90.1 Hz. In addition, vibration isolation performance tests were conducted to verify the actual effect of the air springs, and the results show that their effective vibration isolation frequency band is 9-70 Hz, which can suppress the transmission of low- and medium-frequency ground vibrations. In summary, the study reveals the distribution patterns of the rigid body and elastic modes of the ultra-precision lathe and its vibration transmission characteristics, providing a theoretical and experimental basis for structural stiffness optimization and vibration isolation system matching of machine tools.

     

/

返回文章
返回