圆弧端齿磨床几何误差建模及误差源贡献度分析

Geometric error propagation modeling and error source contribution analysis of circular arc curvic coupling grinding machine

  • 摘要: 针对圆弧端齿磨削过程中机床几何误差对加工精度影响关系复杂、主导误差源难以识别的问题,以X/Z/C三轴圆弧端齿磨床为研究对象,建立了面向砂轮-工件相对位置误差的几何误差传播模型。首先,根据机床运动结构,将几何误差源划分为X轴误差、Z轴误差、C轴误差和轴间几何误差,共计21项误差源;其次,基于多体系统理论建立砂轮端和工件端运动链模型,并将砂轮-工件空间相对位置误差投影到圆弧端齿局部坐标系中,得到径向误差、切向误差和轴向误差表达式;然后,通过局部误差雅可比矩阵计算典型工况下各几何误差源的综合灵敏度,并在考虑误差源幅值的基础上进行误差贡献度分析;最后,进一步建立全齿圈误差评价方法,分析不同加工半径下齿圈径向跳动、齿距累积误差和端面齿高波动的误差水平及主要贡献来源。结果表明,X轴滚转误差、Z轴角度误差、Z轴位置类误差及C轴相关误差对圆弧端齿加工误差具有显著影响,其中X轴滚转误差在局部综合误差中贡献度最高;与内圈加工半径相比,外圈加工半径下全齿圈误差指标整体增大,说明加工半径会放大回转轴角度误差和切向误差的影响。研究结果可为圆弧端齿磨床结构精度控制和关键误差源识别提供理论依据。

     

    Abstract: Aiming at the complicated influence of machine tool geometric errors on machining accuracy and the difficulty in identifying dominant error sources during curvic coupling grinding, a three-axis curvic grinding machine with X/Z/C axes is taken as the research object, and a geometric error propagation model oriented to the relative position error between the grinding wheel and workpiece is established. First, according to the kinematic configuration of the machine tool, geometric error sources are classified into four categories including X-axis errors, Z-axis errors, C-axis errors and inter-axis geometric errors, covering a total of 21 error items. Second, kinematic chain models for the grinding wheel side and workpiece side are constructed based on the multi-body system theory. The spatial relative position error between the grinding wheel and workpiece is projected into the local coordinate system of curvic teeth, and the mathematical expressions of radial error, tangential error and axial error are derived. Third, the comprehensive sensitivity of each geometric error source under typical working conditions is calculated using the local error Jacobian matrix, and the error contribution rate is analyzed with the amplitude of each error source taken into consideration. Finally, an evaluation method for full-ring tooth errors is further established to investigate the magnitude and primary contributing sources of radial runout, cumulative pitch error and end-face tooth height fluctuation under different machining radii. The results indicate that the X-axis roll error, Z-axis angular errors, Z-direction positional errors and relevant C-axis errors exert remarkable impacts on curvic tooth machining errors, among which the X-axis roll error makes the largest contribution to the comprehensive local error. In comparison with inner-ring machining at small radii, all full-ring tooth error indices increase obviously for outer-ring machining at larger radii, demonstrating that the machining radius amplifies the effects of rotary axis angular errors and tangential errors. The presented research provides a theoretical foundation for structural precision control and critical error source identification of curvic grinding machines.

     

/

返回文章
返回