面向多流道拓扑的分流式整体叶轮轮毂面精加工刀具路径规划

Topology-aware tool-path planning for finish machining of splitter-impeller hub surfaces

  • 摘要: 针对分流叶片前缘使轮毂切削层边界发生分叉、加工区域由单一流道演化为多个子区域,导致传统单流道刀路规划方法存在边界配对困难、空切行程增加和前缘接刀不连续等问题,提出一种面向多流道拓扑的自适应区域划分与轮毂精加工刀路规划方法。首先,利用主叶片、分流叶片偏置面与轮毂切削层曲面的相交关系,识别ABR单区域及ABR/ABS/ASBR多区域拓扑;其次,以分流叶片前缘特征点为基准,通过参数域边界插值、球面约束裁剪和连续光顺,将三个子区域重构为ABS和ASBR两个连续加工区域,并在重构边界之间生成轮毂精加工路径;最后,在逐刀位无干涉可行域约束下,采用SLERP构造候选刀轴并通过NLOPT优化旋转轴角度序列。仿真结果表明,所生成刀路能够连续覆盖分流叶片两侧轮毂区域,仿真过程中未出现刀具-工件碰撞报警,优化后的A/C轴角度序列在分流叶片前缘附近具有更好的连续性。

     

    Abstract: Splitter blades cause the intersection boundaries on hub cutting layers to branch and change from a single passage into multiple subregions. Conventional single-passage strategies therefore encounter ambiguous boundary pairing, additional air-cutting motions, and discontinuous connections near the splitter leading edge. To address these topology-specific difficulties, a topology-aware adaptive region-partitioning and finish-machining tool-path method is proposed. The intersections between the offset blade surfaces and the hub cutting-layer surface are first used to identify the single ABR region and the multi-region ABR/ABS/ASBR topology. With the splitter leading-edge feature point as a reference, parametric-domain interpolation, sphere-constrained trimming, and continuity-preserving reconstruction are then employed to merge the three subregions into two continuous machining regions, ABS and ASBR, between whose reconstructed boundaries the hub tool paths are generated. Finally, candidate tool axes are constructed by SLERP within the interference-free feasible domain at each cutter location and optimized using NLOPT. Simulation results show that the generated paths continuously cover the hub regions on both sides of the splitter blade without reported tool-workpiece collision, while the optimized A/C-axis angle sequences are more continuous near the splitter leading edge.

     

/

返回文章
返回