双移动机器人协同转运的门控自适应鲁棒控制

Gated adaptive robust control for cooperative transportation using two mobile robots

  • 摘要: 面向制造车间长大件由2台移动机器人协同转运时容易出现的轨迹偏移和距离约束漂移问题,考虑载荷变化、轮地摩擦波动及外部扰动引起的模型不确定性,提出一种门控自适应鲁棒约束跟随控制方法。建立领航车、跟随车与刚性负载连杆的运动学-动力学统一模型,并将轨迹跟踪、路径协调和内部几何保持统一描述为约束跟随问题;在Udwadia-Kalaba标称约束跟随项基础上,引入自适应鲁棒补偿项和门控自适应律。Lyapunov稳定性分析表明约束跟随误差和自适应边界参数估计误差一致有界,且约束跟随误差一致最终有界。4种含不确定性工况下与线性二次型调节器的对比结果表明,所提方法能够有效抑制距离约束漂移,并减弱模型不确定性对协同转运精度的影响。

     

    Abstract: To mitigate trajectory deviation and distance-constraint drift during the cooperative transportation of long workpieces by two mobile robots, a gated adaptive robust constraint-following control method is proposed under uncertainties induced by load variations, wheel-ground friction fluctuations, and external disturbances. A unified kinematic-dynamic model is established for the leader vehicle, follower vehicle, and rigid load link. Trajectory tracking, path coordination, and internal geometric maintenance are then formulated as a unified constraint-following problem. An adaptive robust compensation term and a gated adaptation law are introduced on the basis of the Udwadia-Kalaba nominal constraint-following term. Uniform boundedness of the constraint-following error and adaptive uncertainty-bound estimation error is established through Lyapunov analysis, and uniform ultimate boundedness of the constraint-following error is demonstrated. Comparative simulations with a linear-quadratic regulator under four uncertain operating conditions demonstrate that distance-constraint drift can be effectively suppressed and that the influence of model uncertainties on cooperative transportation accuracy can be reduced.

     

/

返回文章
返回