基于三维点云降维展开的回转体表面多类型群孔检测方法

A multi-type clustered-hole detection method for revolved surfaces based on dimensionality-reduced unwrapping of 3D point clouds

  • 摘要: 针对回转体表面群孔三维点云检测易受投影畸变影响且耗时较长的问题,提出了一种基于三维点云降维展开的回转体表面多类型群孔检测方法。首先,利用最小二乘算法拟合圆柱,将三维点云降维展开至二维平面,转化为高效的图像处理问题;其次,将二维点云栅格化,结合形态学闭运算修补间隙,精准提取孔洞边界轮廓;最后,提出“圆度-角度-面积比”多特征融合分类算法,实现圆形、矩形等异形孔的自动识别与尺寸提取。测试表明,该方法对圆孔的识别准确率达99.44%,对矩形孔的识别率达100%,两者合计达99.46%,总体均方根误差为0.056 0 mm与0.081 3 mm,显著提升了群孔检测的效率与精度。

     

    Abstract: To address the susceptibility of clustered-hole inspection on revolved surfaces to projection distortion and the associated computational cost in 3D point-cloud measurement, a multi-type clustered-hole detection method based on dimensionality-reduced unwrapping of 3D point clouds is proposed. First, a cylinder is fitted by the least-squares algorithm, and the 3D point cloud is unwrapped onto a 2D plane, whereby the inspection task is converted into an efficient image-processing problem. Subsequently, the 2D point cloud is rasterized, and gaps are repaired by morphological closing, so that hole-boundary contours can be extracted accurately. Finally, a multi-feature fusion classification algorithm based on circularity, angle, and area ratio is presented, by which circular, rectangular, and other irregular holes are identified automatically and their dimensions are extracted. Experimental results demonstrate that recognition accuracies of 99.44% and 100% are obtained for circular and rectangular holes, respectively, corresponding to an overall accuracy of 99.46%. The overall root-mean-square errors are 0.056 0 mm and 0.081 3 mm, respectively. Both the efficiency and the accuracy of clustered-hole detection are thereby significantly improved.

     

/

返回文章
返回