王金江, 牛晓彤, 黄祖广, 薛瑞娟. 数字孪生驱动的数控机床虚拟调试技术研究[J]. 制造技术与机床, 2022, (10): 127-132. DOI: 10.19287/j.mtmt.1005-2402.2022.10.018
引用本文: 王金江, 牛晓彤, 黄祖广, 薛瑞娟. 数字孪生驱动的数控机床虚拟调试技术研究[J]. 制造技术与机床, 2022, (10): 127-132. DOI: 10.19287/j.mtmt.1005-2402.2022.10.018
WANG Jinjiang, NIU Xiaotong, HUANG Zuguang, XUE Ruijuan. Digital twin-driven CNC machine tool virtual commissioning technology study[J]. Manufacturing Technology & Machine Tool, 2022, (10): 127-132. DOI: 10.19287/j.mtmt.1005-2402.2022.10.018
Citation: WANG Jinjiang, NIU Xiaotong, HUANG Zuguang, XUE Ruijuan. Digital twin-driven CNC machine tool virtual commissioning technology study[J]. Manufacturing Technology & Machine Tool, 2022, (10): 127-132. DOI: 10.19287/j.mtmt.1005-2402.2022.10.018

数字孪生驱动的数控机床虚拟调试技术研究

Digital twin-driven CNC machine tool virtual commissioning technology study

  • 摘要: 数控机床调试阶段的调试质量直接影响其加工精度,然而数控机床在服役阶段的加工场景丰富多变,同时作为复杂机电系统代表性设备包含庞杂耦合关系,一般调试方式在此情况下的调试结果的有效性十分有限。因此,文章提出在虚拟环境中模拟机床运行时复杂的加工场景并进行虚拟调试的方式,以得到最佳运行参数。首先通过分析机电系统复杂耦合关系,采用多领域统一建模语言结合虚实映射策略构建了数控机床数字孪生模型;其次基于孪生模型对复杂加工场景进行模拟,并提出数控机床虚拟调试方式;最后以数控机床主轴系统为例,验证了所提方法的有效性和现场应用的可行性。试验结果表明响应时间缩短12%、稳态误差降低54%。

     

    Abstract: The commissioning quality of CNC machine tools in the commissioning stage directly affects their machining accuracy. However, CNC machine tools in the service stage are rich and varied in processing scenarios, and as the representative equipment of complex electromechanical systems, they contain massive and complex coupling relationships. Therefore, the effectiveness of general commissioning methods in this case is very limited. Therefore, this paper proposes a way to simulate the complex machining scene of machine tool running in virtual environment and carry out virtual commissioning to get the best running parameters. Firstly, by analyzing the complex coupling relationship of electromechanical system, a digital twin model of CNC machine tools was constructed using multi-domain unified modeling language combined with virtual-real mapping strategy. Secondly, the complex machining scene was simulated based on the twin model, and the virtual commissioning method of NC machine tool was proposed. Finally, a numerical control machine tool spindle system is taken as an example to verify the effectiveness of the proposed method and the feasibility of field application. The experimental results show that the response time is reduced by 12% and the steady-state error is reduced by 54%.

     

/

返回文章
返回