[1] |
张学刚, 梁政. 弧齿圆柱齿轮研究现状综述[J]. 机械传动, 2020, 44(7): 140-150. https://www.cnki.com.cn/Article/CJFDTOTAL-JXCD202007024.htm
|
[2] |
张福民. 在X53K铣床上加工弧齿线圆柱齿轮[J]. 机械工艺师, 1984, 8(8): 18-19. https://www.cnki.com.cn/Article/CJFDTOTAL-XXGY198408007.htm
|
[3] |
彭福华. 元拉元弧齿线元柱齿轮的研究[J]. 吉林工业大学学报, 1978(1): 14-40. https://www.cnki.com.cn/Article/CJFDTOTAL-JLGY197801002.htm
|
[4] |
彭福华, 王秀. 圆弧齿线圆柱齿轮及其切齿法的试验研究[J]. 工具技术, 1983(9): 5-11. https://www.cnki.com.cn/Article/CJFDTOTAL-GJJS198309001.htm
|
[5] |
赵学镛, 王立军. 在滚齿机上加工圆弧齿线圆柱齿轮可行性的研究[J]. 太原机械学院学报, 1987, 1(1): 91-98. https://www.cnki.com.cn/Article/CJFDTOTAL-HBGG198701016.htm
|
[6] |
郑江, 李瑛. 在滚齿机上加工双向圆弧齿轮[J]. 机械制造, 1998(9): 22-23. https://www.cnki.com.cn/Article/CJFDTOTAL-JXZG199809012.htm
|
[7] |
雷楠南. 弧齿圆柱齿轮铣齿机的研制[J]. 机床与液压, 2019, 47(8): 48-52. https://www.cnki.com.cn/Article/CJFDTOTAL-JCYY201908013.htm
|
[8] |
Liu S. Curvilinear cylindrical gears[J]. Gear Technol, 1988, 5(3): 8-12.
|
[9] |
Tseng R, Tsay C. Mathematicalmodel and undercutting of cylindrical gears with curvilinear shaped teeth[J]. Mechanism and Machine Theory, 2001, 36(11): 1189-1202. https://www.sciencedirect.com/science/article/pii/S0094114X01000490
|
[10] |
Tseng R, Tsay C. Contactcharacteristics of cylindrical gears with curvilinear shaped teeth[J]. Mechanism and Machine Theory, 2004, 39(9): 905-919. doi: 10.1016/j.mechmachtheory.2004.04.006
|
[11] |
Fuentes A, Ruiz-Orzaez R, Gonzalez-Perez I. Computerized design, simulation of meshing, and finite element analysis of two types of geometry of curvilinear cylindrical gears[J]. Computer Methods in Applied Mechanics and Engineering, 2014, 272: 321-339. doi: 10.1016/j.cma.2013.12.017
|
[12] |
Fuentes-Aznar A, Ruiz-Orzaez R, Gonzalez-Perez I. Comparison of spur, helical and curvilinear gear drives by means of stress and tooth contact analyses[J]. Meccanica, 2017, 52(7): 1721-1738. doi: 10.1007/s11012-016-0515-y
|
[13] |
Chen Y C, Gu M L. Contact stress of modified curvilinear gears[C]. American Institute of Physics, 2010.
|
[14] |
Chen Y, Gu M. Tooth contact analysis of a curvilinear gear set with modified pinion tooth geometry[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2011, 225(C4): 975-986.
|
[15] |
Chen Y, Lo C, Chen W. Curvature analysis and hertzian contact stress of a modified curvilinear gear set with localized bearing contact[M]. ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, American Society of Mechanical Engineers Digital Collection, 2014.
|
[16] |
Chen Y, Lo C. Contact stress and transmission errors under load of a modified curvilinear gear set based on finite element analysis[J]. Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2015, 229(2): 191-204. doi: 10.1177/0954406214532907
|
[17] |
Chen Y, Li Z, Lo C, et al. A study on the improvement of meshing characteristics of a complementary curvilinear gear set generated by complementary rack cutters[J]. Transactions of The Canadian Society for Mechanical Engineering, 2017, 41(2): 281-291.
|
[18] |
Uzun M. Theinvestigation on manufacturing time of a new type concave-convex gear by a CNC milling machine[J]. International Journal of Advanced Manufacturing Technology, 2015, 77(5-8): 1275-1280. doi: 10.1007/s00170-014-6541-9
|
[19] |
Uzun M, Inan A. Manufacturingthe new type concave-convex profile involute gears modeled by CAD-CAM in CNC milling machines[J]. Journal of The Brazilian Society of Mechanical Sciences and Engineering, 2015, 37(1): 255-261. doi: 10.1007/s40430-014-0170-y
|
[20] |
Uzun M, Usca U A, Gur Y. Manufacturing of a new type curvilinear tooth profile gears by using a different method[C]. Turkey: 2016.
|
[21] |
Litvin F L, Fuentes A. Gear geometry and applied theory[M]. Second Edition ed. Cambridge: Cambridge University Press, 2004: 818.
|