Structural design and functional analysis of propeller CNC polishing machines
-
摘要: 船用螺旋桨是所有船舶发动机的一种较为重要的组成部件,螺旋桨的加工质量及各项指标合格对于船舶发动机的动力输出等多方面都有十分关键的影响。通过研究螺旋桨各项指标,确定螺旋桨数控抛光机的整体布局与传动系统的设计方案,并进行了较为完整的结构设计和功能分析,最终设计出专门针对船用螺旋桨叶片抛光的数控抛光机。该数控抛光机能够大幅度提高螺旋桨叶片的抛光精度、使用寿命等基础性能,并减少制造安装所需的人力和物力以及减小人工抛光的工作强度,从而解决螺旋桨抛光难的问题。Abstract: Marine propellers are a relatively important component of all marine engines. The processing quality of the propellers and the qualification of various indicators have a very critical impact on the power output of the marine engine. By studying the various indicators of the propeller, the overall layout of the propeller CNC polishing machine and the design plan of the transmission system are determined, and a relatively complete structure design and function analysis are carried out. Finally, a CNC polishing machine specially designed for the polishing of marine propeller blades is designed. The CNC polishing machine can greatly improve the basic performance such as the polishing accuracy and service life of the propeller blade, and reduce the manpower and material resources required for manufacturing and installation and the work intensity of manual polishing, thereby solving the problem of difficult polishing of propellers.
-
Key words:
- propeller /
- CNC polishing machine /
- structural design /
- transmission system
-
表 1 螺旋桨数控抛光机技术参数
技术指标 参数值 外部尺寸 1 500 mm×1 500 mm×1 500 mm 移动进
给范围X轴 1 000 mm Y轴 1 000 mm Z轴 1 200 mm 旋转进
给范围B轴 0°~360° C轴 −45°~45° 砂轮转速 10 000 r/min 表 2 螺旋桨抛光质量指标对比
参数指标 表面粗糙度/μm 局部螺距误差 截面螺距误差 平均螺距误差 精度要求 ≤3.2 ≤2% ≤1.5% ≤1% 检测值 2.9 1.7% 1.2% 0.8% 是否达标 是 是 是 是 -
[1] 侯博. 大型螺旋桨测量—磨削加工一体化制造方法与技术[D]. 大连: 大连理工大学, 2017. [2] 马帅. 大型船用螺旋桨铣磨复合加工方法研究[D]. 重庆: 重庆理工大学, 2019. [3] 王洋. 基于海洋工程装备及高技术船舶的发展分析[J]. 船舶物资与市场, 2020(2): 65-66. [4] 刘建贤. 非球面抛光机结构设计及运动参数优化[D]. 哈尔滨: 哈尔滨工业大学, 2009. [5] 丁明亮. 叶片多坐标数控抛光装备及编程技术研究[D]. 西安: 西北工业大学, 2007. [6] 景宏令. 数控机床几何误差分类与建模技术研究[D]. 天津: 河北工业大学, 2014. [7] 李斌. 船用螺旋桨的五轴数控加工机床设计和加工技术[J]. 舰船科学技术, 2020(10): 214-216. [8] 张明德, 王加林, 苏占领, 等. 船用螺旋桨叶片五轴联动砂带磨削方法研究[J]. 现代制造工程, 2016(3): 43-48. [9] 张亚男. 基于六自由度并联机构的螺旋桨桨叶磨削装置研制[D]. 镇江: 江苏科技大学, 2019. [10] 冀志超. 螺旋桨数字化抛光加工中的在机测量关键技术[D]. 大连: 大连理工大学, 2016. [11] 孔林. 小型甘蔗剥叶机剥叶机构设计优化与实验研究[D]. 柳州: 广西科技大学, 2014. [12] 何志强. 叶片抛光轮的结构设计及其抛光工艺参数优化[D]. 沈阳: 沈阳航空航天大学, 2018. [13] 杨小芳, 史耀耀, 段继豪, 等. 整体叶盘五坐标数控抛光机设计与应用[J]. 科学技术与工程, 2010, 10(9): 2061-2065. doi: 10.3969/j.issn.1671-1815.2010.09.005 [14] 晁彩霞, 修世超. 点磨削零件接触力学特性分析[J]. 辽宁工程技术大学学报:自然科学版, 2018, 37(5): 834-838. [15] 王加林. 整体螺旋桨型面机器人砂带抛磨方法及软件开发[D]. 重庆: 重庆理工大学, 2016. [16] 尹咸. 整体螺旋桨机器人砂带磨削加工工艺技术及试验研究[D]. 重庆: 重庆大学, 2015. [17] 张磊. 齿轮误差建模与应力分析研究[D]. 长沙: 湖南大学, 2014. [18] 张亮军. 一种螺旋桨加工用打磨装置: 中国,CN207953459U[P]. 2018-10-12. [19] 杨克, 张耀娟, 关尚军. 五轴联动数控工具磨床[J]. 长春工业大学学报, 2016, 37(2): 115-118. [20] 张佳丽. 发动机叶片五坐标数控抛光机总体设计与研究[D]. 西安: 西北工业大学, 2007.