Automatic tightening machine system for multi-specification nuts
-
摘要: 不同型号的汽车保险丝盒结构上存在较大的差异,装配时需要拧紧的螺母规格和种类繁多,人工装配必须使用多把电批轮换进行,不仅效率低而且拧紧力矩也无法精确控制。设计了一种基于扭矩监测的面向多规格螺母的自动拧紧机,可自动实现多规格螺母的上料、定位、拧紧、拧紧力矩实时检测和自动更换扳手功能。经过样机试验测试,系统运行可靠并且拧紧效果良好,生产效率与人工装配相比提高了20%以上,还提高了汽车保险丝盒装配的柔性化水平。Abstract: There are many specifications and types of nuts that need to be tightened during assembly, due to the great differences in the structure of different types of automobile fuse boxes. Manual assembly requires multiple replacement of electric batches, not only the efficiency is low, but also the tightening torque cannot be accurately controlled. An automatic tightening machine for multi-specification nuts based on torque monitoring is designed, which can automatically achieve the functions of loading, positioning, tightening, tightening torque real-time detection of multi-specification nuts and automatic wrench replacement. The prototype test shows that the system is reliable and the tightening effect is good, the production efficiency is increased by more than 20% compared with manual assembly, and the flexibility of automobile fuse box assembly is improved.
-
Key words:
- automatic tightening /
- torque testing /
- automobile fuse box /
- multi-specification nuts
-
表 1 螺母的给料器方案对比表
名称 优点 缺点 插板式给料器 原理结构均比较简单,给料可靠,可以自己进行加工制造 设计制造比较难,
可靠性差回转盘式给料器 在每个回转过程中,凹槽长度能够保证多个零件被每个凹槽挑选,给料效率比较高 结构复杂,设计制造较难,工作任务繁重,
可靠性差振动盘式给料器 供料速度可以进行调整,所需的激振力不大,比较节省能量,适用于小型零部件的输送 结构比较复杂,
费用较高叶轮式给料器 选料凹槽比较多,效率较高 可靠性差,叶轮外形
加工困难表 2 不同种类减速器的特点
减速器类型 特点 圆柱齿轮减速器 减速比较小,体积较大 涡轮蜗杆减速器 具有反向自锁功能,减速比较大,体积较大 摆线针轮减速器 结构较紧凑,回程间隙小,制造工艺复杂,
制造精度高 -
[1] 罗毅, 杨昆, 商春雪, 等. 基于多摄像头的汽车保险丝盒检测与装配方法[J]. 电子测量与仪器学报, 2019, 33(8): 30-39. [2] 王宇, 谢云斐, 何腾鹿, 等. 基于振动盘的法兰自动送料机构设计与分析[J]. 科学技术创新, 2018(33): 133-135. doi: 10.3969/j.issn.1673-1328.2018.33.081 [3] 冯德富. 拧紧机的配置结构及其与精度的关系[J]. 汽车工艺与材料, 2012(8): 59-63. doi: 10.3969/j.issn.1003-8817.2012.08.016 [4] 朱辉, 李培林, 王崴, 等. 基于理论的多轴拧紧机结构优化设计[J]. 机械设计, 2015, 32(12): 26-29. [5] 钱丰. 一种螺钉螺母柱自动上送料机构: 中国, 201621374833.5[P]. 2017-06-30. [6] 张乐贡, 沈强, 徐苑. 螺母自动上料锁丝机构: 中国, 201820067592.2[P]. 2018-08-10. [7] 王振生, 杨志坚, 巫燕飞, 等. 螺母上料机构以及紧固件自动加工设备: 中国, 201821406295.2[P]. 2019-06-04. [8] 张方阳. 基于五轴机器人的平板显示器紧固件自动锁紧解决方案[J]. 装备制造技术, 2019(12): 78-81. [9] 陈绪. 基于深度卷积神经网络的零件抓取系统研究[D]. 上海: 上海海洋大学, 2019. [10] 姜赞. 基于动态反馈的小长径比螺丝锁付系统设计[D]. 厦门: 厦门理工学院, 2019.