Design of lifter core-pulling mechanism for side hole in narrow space
-
摘要: 针对塑件内部狭窄空间内侧孔的抽芯问题,提出了采用镶件与斜顶配合成型的方法。以塑料外壳为例,首先将狭窄圆筒从型芯中分割成镶件,以减少型芯的加工难度;采用斜顶对圆筒中的侧方孔成型,针对斜顶向外抽芯时会与塑件发生干涉的情况,将抽芯方向调整为沿圆筒径向向内;然后利用将斜顶机构嵌套在镶件上的方式,解决了斜顶机构在狭小空间的干涉问题。Abstract: In view of the core-pulling problem of the inner hole in the narrow space inside the plastic part, the method of combining the insert with the slanting top was put forward. Taking the plastic shell as an example, the narrow cylinder is first divided into inserts from the core to reduce the processing difficulty of the core, and the lifter is used to shape the side holes in the cylinder, aiming at the interference between the lifter and the plastic part when pulling the core outwards, the core-pulling direction is adjusted to be in the radial direction of the cylinder, and then the interference problem of the slanting top mechanism in the narrow space is solved by embedding the slanting top mechanism on the insert.
-
Key words:
- shell /
- lateral square hole /
- interference /
- lifter /
- insert
-
[1] 熊毅, 王伟. 四面六倒扣异形件二级侧抽芯注射模设计[J]. 中国塑料, 2021, 35(2): 101-106. [2] 阳夏冰, 杨素华. 基于UG的控制器支架热流道注塑模具设计与成型件数控加工[J]. 中国塑料, 2019, 33(8): 112-117,143. [3] 熊毅, 赵纪国. 多侧孔复杂曲面塑件的分型及成形镶件设计[J]. 塑料工业, 2020, 48(5): 81-84. doi: 10.3969/j.issn.1005-5770.2020.05.016 [4] 胡清根, 白文, 龚姝婷. 基于UG的相机面壳注塑模具设计[J]. 塑料科技, 2017, 45(1): 78-80. [5] 程国飞, 丁立刚, 魏文强, 等. 带斜孔的U形支座注塑模具设计[J]. 现代塑料加工应用, 2020, 32(2): 46-49. [6] 刘朝福. 注塑成型实用手册[M]. 北京: 化学工业出版社, 2018: 214-215. [7] 许傲, 黄力. 医用接插头前模四面抽芯脱模注塑模具设计[J]. 塑料, 2017, 46(2): 110-113. [8] 梅益, 朱春兰, 宋沛毅, 等. 短固定手柄套多侧向抽芯注塑模具设计[J]. 工程塑料应用, 2018, 46(4): 75-79. doi: 10.3969/j.issn.1001-3539.2018.04.015 [9] 卞平. 热流道双叠层注塑模具设计[J]. 塑料工业, 2017, 45(10): 65-68. doi: 10.3969/j.issn.1005-5770.2017.10.015