Research on the effect of inner raceway defects on the stiffness characteristics of rolling bearings
-
摘要: 滚动轴承广泛应用于矿用电机等大型设备,在工况复杂多变、运行条件恶劣的情况下,长期高负荷运转会导致滚动轴承产生疲劳点蚀,在滚道表面产生缺陷,缺陷的恶化会影响设备的正常工作。针对内滚道存在缺陷的滚动轴承,将缺陷引起的附加位移加到轴承的弹性形变中,根据力学平衡方程,分析各滚动体的载荷分布,并建立内滚道存在缺陷的滚动轴承刚度模型,分析缺陷长度和深度对滚动轴承刚度特性的影响规律。结果表明,缺陷位于非承载区时,缺陷轴承的平均刚度和无缺陷轴承的平均刚度相等;当缺陷随着内圈的转动由承载区向非承载区移动时,轴承的平均刚度先减小后增大,且平均刚度的大小与缺陷的长度和深度负相关。Abstract: Rolling bearings are widely used in mining motors and other large equipment. Under complex and changeable working conditions and harsh operating conditions, long-term and high load operation will lead to fatigue pitting corrosion of rolling bearings and defects on raceway surface, and the deterioration of defects will affect the normal operation of equipment. In this paper, for rolling bearings with defects in the inner raceway, the additional displacement caused by the defect is added to the elastic deformation of the bearing. According to the mechanical balance equation, the load distribution of each rolling element is analyzed, and the stiffness model of the rolling bearing with defects in the inner raceway is established. The influence of defect length and depth on rolling bearing stiffness characteristics is analyzed. The results show that when the defect is located in the non-loaded area, the average stiffness of the defective bearing is equal to the average stiffness of the non-defective bearing. When the defect moves from the loaded area to the non-loaded area with the rotation of the inner ring, the average stiffness of the bearing first decreases and then increase, and the average stiffness is negatively related to the length and depth of the defect.
-
表 1 深沟球轴承6008具体参数
轴承参数 数值 轴承内径d/mm 40 轴承外径D/mm 68 轴承宽度B/mm 15 滚珠直径Dw/mm 8 节圆直径/mm 55 滚动体数 Z /个 12 内滚道曲率半径ri/mm 4.12 外滚道曲率半径re/mm 4.20 -
[1] He J, Somogyi C, Strandt A, et al. Diagnosis of stator winding short-circuit faults in an interior permanent magnet synchronous machine[C]. Energy Conversion Congress and Exposition, 2014: 3125-3130. [2] 韩清凯, 云向河, 李宁, 等. 大型滚动轴承故障诊断及寿命评估技术进展[J]. 轴承, 2021(9): 1-13. [3] 林水泉. 基于旋转机械滚动轴承的时域故障诊断方法[J]. 自动化技术与应用, 2020, 39(8): 1-5,35. doi: 10.3969/j.issn.1003-7241.2020.08.001 [4] 张金豹, 邹天刚, 王敏, 等. 滚动轴承剩余使用寿命预测综述[J/OL]. 机械科学与技术: 1−5. https://doi.org/10.13433/j.cnki.1003-8728.20200489. [5] Stack J R, Habetler T G, Harley R G. Fault classification and fault signature production for rolling element bearings in electric machines[J]. Transactions on Industry Applications, 2004, 40(3): 735-739. doi: 10.1109/TIA.2004.827454 [6] Kulkarni V V, khadersab A. Condition monitoring analysis of rolling element bearing based on frequency envelope[J]. Materials Today:Proceedings, 2021, 46: 4667-4671. doi: 10.1016/j.matpr.2020.10.291 [7] Huang Y, Huang C G, Ding J M, et al. Fault diagnosis on railway vehicle bearing based on fast extended singular value decomposition packet[J]. Measurement, 2020, 152: 107277. doi: 10.1016/j.measurement.2019.107277 [8] McFadden P D, Smith J D. Model for the vibration produced by a single point defect in a rolling element bearing[J]. Academic Press, 1984, 96(1): 69-82. [9] Feng N S, Hahn E J, Randall R B. Using transient analysis software to simulate vibration signals due to rolling element bearing defects[J]. Applied Mechanics, 2002: 689-694. [10] Jiang Y C, Huang W T, Luo J N, et al. An improved dynamic model of defective bearings considering the three-dimensional geometric relationship between the rolling element and defect area[J]. Mechanical Systems and Signal Processing, 2019, 129: 694-716. doi: 10.1016/j.ymssp.2019.04.056 [11] Nakhaeinejad M, Bryant M D. Dynamic modeling of rolling element bearings with surface contact defects using bond graphs[J]. Journal of Tribology, 2011, 133(1): 011102. doi: 10.1115/1.4003088 [12] 涂文兵, 梁杰, 罗丫, 等. 加速工况下滚动轴承动态载荷特性研究[J]. 振动与冲击, 2021, 40(9): 152-159. [13] 涂文兵, 杨锦雯, 罗丫, 等. 不同故障程度下的滚动轴承内部接触动态特性分析[J]. 机械强度, 2020, 42(4): 763-769. [14] 陈润霖, 韩沁, 张梦豪, 等. 考虑游隙的滚动轴承刚度模型及其时变特性分析[J]. 机械传动, 2021, 45(3): 8-14. [15] Petersen D, Howard C, Prime Z. Varying stiffness and load distributions in defective ball bearings: Analytical formulation and application to defect size estimation[J]. Journal of Sound and Vibration, 2015, 337: 284-300. doi: 10.1016/j.jsv.2014.10.004 [16] Petersen D, Howard C, Sawalhi N, et al. Analysis of bearing stiffness variations, contact forces and vibrations in radially loaded double row rolling element bearings with raceway defects[J]. Mechanical Systems and Signal Processing, 2015, 50-51: 139-160. doi: 10.1016/j.ymssp.2014.04.014 [17] 徐永智, 夏新涛. 内圈沟道损伤直径对滚动轴承振动性能的测度[J]. 航空动力学报, 2021, 36(4): 734-740. [18] 王凯, 剡昌锋, 王风涛, 等. 深沟球轴承复合故障动力学特征[J]. 哈尔滨工业大学学报, 2020, 52(1): 133-140. doi: 10.11918/201809184 [19] 杨天蕴, 丁千, 郭涛, 等. 动车组转向架轴承局部损伤振动特性分析[J]. 振动测试与诊断, 2016, 36(4): 665-673,808. [20] 张慧玲, 吕福玲. 滚动轴承点蚀故障动力学建模与仿真[J]. 机械强度, 2019, 41(4): 821-827. [21] Ghalamchi B, Sopanen J, Mikkola A. Modeling and dynamic analysis of spherical roller bearing with localized defects: analytical formulation to calculate defect depth and stiffness[J]. Shock and Vibration, 2016, 2016: 2106810.