The development and design of numerical control drilling machine for tire movable mould
-
摘要: 一种轮胎模具需要在内圆锥面上钻削多孔,用通用钻床或钻铣加工中心加工都有难度。研制了用于本工序的数控钻床,工件放置在工作台上,工作台的旋转运动实现工件分度,相对于工作台,钻削头可沿3坐标位移,其中Y轴方向与内锥母线方向平行,且Y轴方向可以在一定范围内调节适应锥度不同的工件。钻削头的3坐标位移运动均由伺服电机驱动滚珠丝杠传动,直线导轨导向,位移准确、定位精度高。工作台、底座等主要零件铸造成形,精度保持性好、刚性强。该机具有加工精度高、操作方便等优点。尚需优化工艺参数,进一步提高加工效率。Abstract: A tire mold needs to drill holes on its inner conical surface, and it is difficult to process with general drilling machine or drilling and milling machining center. In this paper, a numerical control drilling machine for this process is developed. In this machine tool, the workpiece is placed on the worktable, and the rotation of the worktable realizes the workpiece indexing. Relative to the worktable, the drilling head can move along 3 coordinates. The y-axis direction is parallel to the inner cone bus, and the y-axis direction can be adjusted within a certain range to adapt to workpieces with different inner cone. The 3-coordinate displacement of the drilling head is driven by the servo motor, driven by the ball screw and guided by the linear guide rail, so the displacement is accurate and the positioning accuracy is high. The worktable, base and other main parts are cast, with good precision retention and strong rigidity. The machine has the advantages of high machining precision and convenient operation. The process parameters need to be optimized to further improve the processing efficiency.
-
Key words:
- CNC drilling machine /
- drilling /
- tire mould
-
表 1 35号钢材料属性
含碳量 抗拉强度 /MPa 屈服强度/MPa 硬度/HRC 0.32~0.40 ≥530(54) ≥315(32) 38~45 表 2 主要技术参数
序号 项目 技术参数 1 工作台直径/mm 1 450 2 X轴行程/mm 160 3 Y轴行程/mm 500 4 Z轴行程/mm 100 5 主电机功率/kW 3 6 设备外形尺寸/(mm×mm×mm) 3 350×1 500×3 100 7 设备重量/t 4 -
[1] 刘迎, 赵永瑞, 潘川. 轮胎模具结构研究现状及分析[J]. 模具工业, 2017, 43(3): 8-11. [2] 吕孟春. 浅析汽车轮胎模具设计制造[J]. 科技展望, 2016, 26(27): 46. doi: 10.3969/j.issn.1672-8289.2016.27.042 [3] 李强. 橡胶模具行业发展现状及存在问题分析[J]. 中国橡胶, 2016, 32(16): 19-20. doi: 10.3969/j.issn.1009-5640.2016.16.006 [4] 徐其航, 林若波, 黄建新, 等. 可拼装轮胎模具夹具结构精度分析[J]. 模具工业, 2016, 42(4): 60-63. [5] 刘迎. 轮胎活络模具的结构设计分析及软件开发[D]. 青岛: 中国石油大学(华东), 2018. [6] 石鹏, 杜平, 孙日文, 等. 活络轮胎模具传热模拟与实验研究[J]. 塑料工业, 2021, 49(S1): 96-102. [7] 尹燕刚, 陈进伟, 冯显英, 等. 硬支承式轮胎动平衡机新型振动系统设计与分析[J]. 组合机床与自动化加工技术, 2016(7): 49-51. [8] 徐其航, 林若波, 林德雄. 轮胎模具加工夹具的优化设计与力学分析[J]. 机电工程技术, 2021, 50(8): 131-134. doi: 10.3969/j.issn.1009-9492.2021.08.037 [9] 王芹, 胡海明. 轮胎模具底座拓扑优化[J]. 橡胶工业, 2020, 67(2): 145-148. [10] 王展旭, 王敏, 高振明, 等. 免充气蜂巢结构轮胎成型工艺和模具设计[J]. 模具技术, 2018(3): 14-17. doi: 10.3969/j.issn.1001-4934.2018.03.004 [11] 杜平, 张增超, 孙日文, 等. 铝合金轮胎模具低压铸造结构设计对缩松的影响[J]. 现代制造技术与装备, 2017(7): 32-34. doi: 10.3969/j.issn.1673-5587.2017.07.018