[1] |
Duflou J R, Habraken A M, Cao J, et al. Single point incremental forming: state-of-the-art and prospects[J]. International Journal of Material Forming, 2018, 11(6): 743-773. doi: 10.1007/s12289-017-1387-y
|
[2] |
Kumar A, Gulati V, Kumar P, et al. Forming force in incremental sheet forming: a comparative analysis of the state of the art[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41(6): 1-45.
|
[3] |
Mohanty S, Regalla S P, Daseswara Rao Y V. Robot-assisted incremental sheet metal forming under the different forming condition[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41(2): 1-12.
|
[4] |
Liu Z, Daniel W J T, Li Y, et al. Multi-pass deformation design for incremental sheet forming: analytical modeling, finite element analysis and experimental validation[J]. Journal of Materials Processing Technology, 2014, 214(3): 620-634. doi: 10.1016/j.jmatprotec.2013.11.010
|
[5] |
Mohammadi A, Vanhove H, Van Bael A, et al. Towards accuracy improvement in single point incremental forming of shallow parts formed under laser assisted conditions[J]. International Journal of Material Forming, 2016, 9(3): 339-351. doi: 10.1007/s12289-014-1203-x
|
[6] |
Saidi B, Giraud Moreau L, Mhemed S, et al. Hot incremental forming of titanium human skull prosthesis by using cartridge heaters: a reverse engineering approach[J]. The International Journal of Advanced Manufacturing Technology, 2019, 101(1): 873-880.
|
[7] |
敖冬威. Ti-6Al-4V 钛合金板材电脉冲辅助单点渐进成形研究[D]. 济南: 山东大学, 2019.
|
[8] |
高铁军, 王旭, 刘少青, 等. TA2钛合金圆筒件超声振动辅助拉深丁艺研究[J]. 兵器材料科学与工程, 2021, 44: 8-12.
|
[9] |
王伟国. 超声振动辅助纯铜微镦粗实验与模拟研究[D]. 济南: 山东大学, 2019.
|
[10] |
Liu S, Shan X B, Guo K, et al. Experimental study on titanium wire drawing with ultrasonic vibration[J]. Ultrasonics, 2018, 83: 60-67. doi: 10.1016/j.ultras.2017.08.003
|
[11] |
Hu J, Shimizu T, Yang M. Investigation on ultrasonic volume effects: Stress superposition, acoustic softening and dynamic impact[J]. Ultrasonics Sonochemistry, 2018, 48: 240-248. doi: 10.1016/j.ultsonch.2018.05.039
|
[12] |
Li Y L, Wang Z J, Zhai W D, et al. The influence of ultrasonic vibration on parts properties during incremental sheet forming[J]. Advances in Manufacturing, 2021, 9(2): 250-261. doi: 10.1007/s40436-021-00347-0
|
[13] |
Yang M, Bai L, Li Y, et al. Influences of vibration parameters on formability of 1060 aluminum sheet processed by ultrasonic vibration-assisted single point incremental forming[J]. Advances in Materials Science and Engineering, 2019, 2019:1-12.
|
[14] |
Alharbi N. Experimental study on designing optimal vibration amplitude in ultrasonic assisted incremental forming of AA6061-T6[J]. Engineering Science and Technology, an International Journal, 2022, 30: 101041. doi: 10.1016/j.jestch.2021.07.004
|
[15] |
Yao Z M, Bai L, Liang X M, et al. Experimental and numerical study of forming force in ultrasonic vibration single point incremental forming[J]. Ferroelectrics, 2022, 596(1): 27-38. doi: 10.1080/00150193.2022.2087247
|
[16] |
Gohil A, Modi B, Patel K. Effect of amplitude of vibration in ultrasonic vibration-assisted single point incremental forming[J]. Materials and Manufacturing Processes, 2022: 1-13.
|
[17] |
翟维东. 铝合金薄板超声辅助渐进成形表面质量及表面材料流动特性探究[D]. 济南: 山东大学, 2020.
|