Architecture design of high-end CNC system based on distributed
-
摘要: 基于分布式的基础上对数控系统的架构进行设计研究，从系统的硬件结构研究、系统的软件架构的研究，提出一种全新的系统架构满足系统软硬件可以满足模块化叠加、抽离、独立优化、易迭代；也能满足高精度、高效率和高表面质量的算力要求；同时还能满足未来数控系统的智能化、网络化和信息化的要求，并验证了这种全新的系统架构设计方案的可行性，为高档数控系统架构设计构建了一种新的设计思路。Abstract: Based on the distributed architecture, this paper designs the architecture of the CNC system. A new system architecture is proposed from the perspective of system hardware architecture and system software architecture ,which is characterized by modular superposition, separation, independent optimization and easy iteration.At the same time, it can also meet the computational requirements of high accuracy, high efficiency and high surface quality.Meet the requirements of intellectualization, networking and informatization of future CNC system.This paper verifies the feasibility of this new system architecture. It constructs a new design idea for the architecture design of high-end CNC system.
-
Key words:
- distributed /
- CNC system /
- system architecture /
- modularization /
- service controller
-
[1] 阴雷鸣, 何英武, 黄昕, 等. 高档数控系统NC模块设计[J]. 微计算机信息, 2011(5): 74-75. [2] 鹿彦. 网络化嵌入式数控系统的设计与实现[J]. 信息与电脑:理论版, 2022(5): 104-106. [3] 袁晓明, 殷苏民. 基于模块化设计的开放式数控系统研究[J]. 煤矿机械, 2006(7): 81-83. doi: 10.3969/j.issn.1003-0794.2006.07.033 [4] 文杰棱, 韩震宇, 王咏麒, 等. 基于双STM32+FPGA的桌面数控车床控制系统设计[J]. 制造技术与机床, 2021(6): 117-120. doi: 10.19287/j.cnki.1005-2402.2021.06.024 [5] 姚文姣, 黄艳. 基于UML的数控系统人机界面建模与实现[J]. 组合机床与自动化加工技术, 2021(7): 88-90,94. doi: 10.13462/j.cnki.mmtamt.2021.07.021 [6] 冯宁. 基于组态技术的开放结构数控系统的研究[J]. 机电工程技术, 2011, 40(8): 29-30,127,201. doi: 10.3969/j.issn.1009-9492.2011.08.006 [7] 汤季安. 加快发展嵌入式中高档数控系统, 提高企业的核心竞争力[J]. 世界制造技术与装备市场, 2006(3): 89-91. [8] 李轲, 唐小琦. 基于ARM剪板机数控系统模块化开发[J]. 组合机床与自动化加工技术, 2011(10): 72-74. doi: 10.3969/j.issn.1001-2265.2011.10.019 -
下载:
点击查看大图
图(8)
计量
- 文章访问数: 91
- HTML全文浏览量: 27
- PDF下载量: 39
- 被引次数: 0
