column
Analysis of clamping layout optimization of aeroengine thin-walled circular parts
ZHANG Chenhong, YU Jianhua, ZHOU Lifeng
2021(1): 21-24. DOI: 10.19287/j.cnki.1005-2402.2021.01.001
Abstract PDF
Stress and fatigue strength analysis of flexible gear in harmonic gear transmission
WANG Yuling, ZHANG Xugang, ZHANG Hua, JIANG Zhigang
2021(1): 25-29. DOI: 10.19287/j.cnki.1005-2402.2021.01.002
Abstract PDF
Optimization and fatigue strength prediction of ultrasonic assisted welding trolley frame based on variable density method
DENG Hailong, LIU Hang, ZHENG Li, LIU Qichen, GUO Yupeng
2021(1): 30-34. DOI: 10.19287/j.cnki.1005-2402.2021.01.003
Abstract PDF
A type of conveyor for large square aluminum ingots
YE Sui, TANG Caiping, HUANG Jungui
2021(1): 35-37. DOI: 10.19287/j.cnki.1005-2402.2021.01.004
Abstract PDF
Research on reliability modeling and evaluation of spindle system of CNC grinder
FAN Jinwei, XUE Liangliang, LIU Qiang, LI Weihua
2021(1): 38-42. DOI: 10.19287/j.cnki.1005-2402.2021.01.005
Abstract PDF
Research on modeling and time-varying characteristics of ball screw feed system based on virtual material
CHEN Yongjiang, TANG Wencheng, GUO Hun, HUA Hongliang, LIU Xiaoyang
2021(1): 43-47. DOI: 10.19287/j.cnki.1005-2402.2021.01.006
Abstract PDF
Study on solving the "stuck neck" problem of equipment by taking advantage of the new national system
SU Zheng, LI Li
2021(1): 47-50. DOI: 10.19287/j.cnki.1005-2402.2021.01.007
Abstract PDF
Layout design and optimization for assembly line system based on simulation
LI Yang, DING Shunyu, HE Yuejie, LIU Yan, WANG Fei, KANG Jinglin
2021(1): 51-55. DOI: 10.19287/j.cnki.1005-2402.2021.01.008
Abstract PDF
Design and manufacture of new-type fine adjustment jack
WANG Feng, LI Yinghua, XU Jiazi, YANG Xianglin
2021(1): 55-58. DOI: 10.19287/j.cnki.1005-2402.2021.01.009
Abstract PDF
Research on flexible machining unit of connecting rod parts
LUO Yingjun, ZHANG Jun, LI Guangjun, MENG Juan, NING Yuhong, WANG Yang
2021(1): 59-63. DOI: 10.19287/j.cnki.1005-2402.2021.01.010
Abstract PDF
Research on machining technology and fixture design of pipe joint parts
LI Zhihao, WEN Liang, WANG Qiang, ZHOU Qing, WANG Yonghong
2021(1): 64-67. DOI: 10.19287/j.cnki.1005-2402.2021.01.011
Abstract PDF
Influence and optimization of technological parameters in high speed milling TC4 titanium alloy with AlTiN coated cutter
WANG Sheng, ZHOU Mingan, WEI Xiaohua, YU Wenli, ZHENG Liwen
2021(1): 68-72, 76. DOI: 10.19287/j.cnki.1005-2402.2021.01.012
Abstract PDF
Research on high-precision technology of economical CNC lathe tool position refit
ZHANG Zhu, TONG Chengqian
2021(1): 73-76. DOI: 10.19287/j.cnki.1005-2402.2021.01.013
Abstract PDF
Curved aluminum alloy planarization process by hammer peening
YANG Fan, DU Manshu, LIN Xiaohui
2021(1): 77-81. DOI: 10.19287/j.cnki.1005-2402.2021.01.014
Abstract PDF
Study of low stress pressing technology of large size thin wall sleeve
LI Zhidong, CHEN Liang, QIN Chushan, SHI Shang
2021(1): 82-84. DOI: 10.19287/j.cnki.1005-2402.2021.01.015
Abstract PDF
Drawing annotation of profile tolerance control assembly gap of automobile body
XU Xusong, SUN Zhiying, WU Dehui, HUA Wu
2021(1): 85-90. DOI: 10.19287/j.cnki.1005-2402.2021.01.016
Abstract PDF
Application of VMD based AR mode and correlation dimension in fault feature extraction for gear
ZHOU Xiaolong, ZHANG Yaojuan, WANG Yao, MA Fenglei
2021(1): 91-95. DOI: 10.19287/j.cnki.1005-2402.2021.01.017
Abstract PDF
Research on the in-situ precision profile modification of the arc-shaped metal based superabrasive wheel
GUAN Jialiang, SHANG Haiyang, ZHANG Xiaohui, GUO Kuichong, XU Zhenzhen, WANG Jianjie
2021(1): 96-100. DOI: 10.19287/j.cnki.1005-2402.2021.01.018
Abstract PDF
An assembly gap and step prediction method based on digital measurement technology
CHEN Hongyu, ZHU Xusheng, CHEN Xuemei, WANG Shunlong, LV Chuanjing
2021(1): 101-107. DOI: 10.19287/j.cnki.1005-2402.2021.01.019
Abstract PDF
Innovative design of safe type positioning cone used for pallets
GAO Xiufeng
2021(1): 108-110. DOI: 10.19287/j.cnki.1005-2402.2021.01.020
Abstract PDF
Development of high speed enclosure for horizontal milling nachine
ZHOU Meng
2021(1): 111-113, 118. DOI: 10.19287/j.cnki.1005-2402.2021.01.021
Abstract PDF
An RTCP automatic measurement loop based on least square method
HUANG Yutong, FANG Yuechi, LIU Pei, LI Xingyue, LI Yaodong, YANG Libo
2021(1): 114-118. DOI: 10.19287/j.cnki.1005-2402.2021.01.022
Abstract PDF
Research on the application of cubic polynomial acceleration and deceleration algorithm
FU Aizhou, HAN Zhenyu, GE Yilun
2021(1): 119-123. DOI: 10.19287/j.cnki.1005-2402.2021.01.023
Abstract PDF
Development and application of key point setting of NC machine tool
MA Guoyan
2021(1): 123-127. DOI: 10.19287/j.cnki.1005-2402.2021.01.024
Abstract PDF
Interconnection and visualization of CNC equipment based on digital twin
HUANG Zuguang, PAN Hui, XUE Ruijuan, WANG Jinjiang, ZHANG Wei, GAO Zhiguo
2021(1): 128-132. DOI: 10.19287/j.cnki.1005-2402.2021.01.025
Abstract PDF