Online

Online articles have been peer-reviewed and accepted, which are not yet assigned to volumes/issues, but are citable by Digital Object Identifier (DOI).
Dynamic positioning accuracy analysis of a slender ball screw drive system considering time-varying dynamic behavior
SU Fang, GAO Yuan, QIN Shenhao, WANG Chensheng
Abstract PDF
KalmanNet-LSTM-based signal processing for precision grating displacement measurement systems
ZHONG Haoyang, WU Dongxu, ZHAO Tao, LI Duo, JIANG Zhenhua
Abstract PDF
Research on thermal error modeling and compensation for precision machining centers based on PLC
MA Chao, FENG Lei, ZHENG Chaobo, MA Jing, ZHANG Ze, ZHA Jun
Abstract PDF
Assembly process information integration and visualization method based on SL-IFP
SHEN Jiatao, ZHANG Yangang, LI Li, WANG Tao
Abstract PDF
Reliability Analysis on Positioning Accuracy of Industrial Robots Based on Meta-action Decomposition
WEI Hao, WANG Hongwei, MU Zongyi, LI Jinyuan, ZHANG Genbao
Abstract PDF
Study on low-damage removal mechanism and microstructure evolution law of 45 steel in wire abrasive flexible machining
LIU Yu, LIN Kaiyuan, SUN Cong
Abstract PDF
Visual SLAM method integrating adaptive low-light enhancement and descriptor optimization
Ni Xiaoyu, Pan Shuaijiang, Zhang Haolong, Hai Rihan, LYU Kai, Wang Yadong
Abstract PDF
Analysis of surface formation process in face grinding considering dynamic and static characteristics of the spindle system
SONG Xingang, TIAN Xiaoguang, SUN Cong, LU Yue
Abstract PDF
Static characteristic simulation analysis and optimization design of porous aerostatic bearings
LI Changsheng, TIAN Chong, WU Dongxu, CHAI Panwen, XIAO Beichuan, DUAN Hao, SUN Guoqing, YANG Shuming, DING Jianjun, JIANG Zhuangde
Abstract PDF
Hybrid predictive modeling and controller parameter tuning for ultra-precision aerostatic guideway
MA Suyu, TONG Zhen, GONG Zheng
Abstract PDF
Roller bearing crowned: a review of its designation, processing, detection and prospects
ZHU Yu, TIAN Li, GE Shidong
Abstract PDF
Simulation analysis of contact deformation for four-stage O-ring seals in aircraft actuators under medium-low pressure conditions
LYU Xinlong, DONG Hao, LIU Shengsheng, ZHAO Daining, LI Chengyu
Abstract PDF
Forward equivalent calibration method for target planes in multi-level rim tire dynamic balancing
CHE Qirui, FENG Xianying, LI Peigang, LIU Shenxing
Abstract PDF
Intelligent monitoring method for punch wear based on punching defects
MA Kun, HUANG Kai, HE Fangke, YU Houyun, LU Wenyuan, Chen Jian
Abstract PDF
Evaluation model of lean incentive mechanism based on improved combined weighting-TOPSIS method
Bai Yunyan, Jiao Ziyiming, Sun Li, Zhang Jing
Abstract PDF
Multi-objective optimization of arc-edged single-crystal diamond tools
ZHOU Zijun, ZHANG Ruitao, TONG Zhen
Abstract PDF
Time-optimal trajectory planning of machine tool loading and manipulator based on IGWO-SA
HAN Jun, XIANG Yang, ZHAO Ye, WANG Xuan, ZHAO Xinlei
Abstract PDF
Design and simulation analysis of forged blank for spacer frame
CHEN Xuan, WU Minghui, CAO Letian, JIANG Rongzhong, NI Jian, LIU Yu, WANG Hui, XIE Shuhong
Abstract PDF
Residual stress prediction in multi-axis milling of titanium alloys based on GPR-RBF
ZHU Derong, XIA Ming, HOU Shaoshuai
Abstract PDF
Fracture mechanism of the chain pin in the carbide furnace-front operation robot
NIU Zhuangwei, YAN Dongjia, LI Hongbo, LI Zhengyang, FAN Xing, WANG Junjie, ZHONG Haisheng, QI Zhikun
Abstract PDF
Thermal error modeling of CNC lathe motorized spindle based on LSTM-TCN-A
KANG Xuanming, WANG Fei, LI Jingmin, CHEN Shuai
DOI: 10.19287/j.mtmt.1005-2402.2026.09.023
Abstract PDF
Rolling bearing fault diagnosis via cascaded feature enhancement using VMD-MOMEDA
LI Jinqi, LIU Chang, ZHAO Jiaxin, FANG Rui
DOI: 10.19287/j.mtmt.1005-2402.2026.09.024
Abstract PDF
Research on on-machine measurement of inner diameter for slender tube parts based on dual-spectroscopy confocal sensors
SONG Yao, ZHU Zijun, FANG Runji, YIN Wendian, WANG Shuli, ZHU Xianglong
DOI: 10.19287/j.mtmt.1005-2402.2026.09.022
Abstract PDF
YOLOv8-LGCV: Lightweight steel surface defect detection model for in-line inspection of hot rolling production line
LI Chuyang, CHEN Hongyu, QI Yulei, CONG Zhaoshen, ZHOU Jianlai, LIU Hang, GUAN Huacheng, DING Yunfei
DOI: 10.19287/j.mtmt.1005-2402.2026.09.021
Abstract PDF
Research on adaptive transformer-BiLSTM tool wear monitoring based on NSGA-II multi-objective optimization
YAN Junying, FENG Qigao, XING Wenkai, YANG Kang, BO Qinghong
DOI: 10.19287/j.mtmt.1005-2402.2026.09.020
Abstract PDF
Design and simulation analysis of multi-layer flux-barrier combined-pole biased permanent-magnet synchronous machine
WANG Weinan, YAN Yuhang, ZHAO Xiaokun, WEI Jian
DOI: 10.19287/j.mtmt.1005-2402.2026.09.019
Abstract PDF
Reliability allocation method for CNC machine tools integrating Cloud Model and CRITIC-VIKOR
WANG Xiaoxin, LI Yansheng, ZHANG Tao, YANG Congbin, CHU Hongyan, CHENG Qiang
DOI: 10.19287/j.mtmt.1005-2402.2026.09.018
Abstract PDF
Active temperature control for CNC external thread grinding machine
TAN Xiaoqing, WANG Li, TAN Geng, ZHAO Xiaodong, YONG Ning, ZHANG Chenjun
DOI: 10.19287/j.mtmt.1005-2402.2026.09.017
Abstract PDF
Research progress on chip morphology control and application in cutting processes
LIANG Yali, WEI Yueyang, LIU Minghao, DING Zhaolei, WANG Xiangyu
DOI: 10.19287/j.mtmt.1005-2402.2026.09.016
Abstract PDF
Prospect on ideal grinding technology in the future
FENG Keming
DOI: 10.19287/j.mtmt.1005-2402.2026.09.015
Abstract PDF
Chatter identification in variable tool posture milling based on time-frequency and modal dual-domain fusion
LI Zhenyang, SONG Qinghua, WANG Xiaojuan, DU Yicong, MA Haifeng
DOI: 10.19287/j.mtmt.1005-2402.2026.09.014
Abstract PDF
Study on the effects of thermal-vibration aging on stress control and mechanical properties of LPBF-formed Ti-6Al-4V components
GAO Quan, FENG Chen, LI Rui, GAO Hanjun, SONG Hechuan, SUN Hongbo
DOI: 10.19287/j.mtmt.1005-2402.2026.09.013
Abstract PDF
Research on an AI-based prediction model for the broaching process parameters of GH4065A superalloy turbine disks
HE Chunshuang, WU Aijiang, XU Yan, DING Qi, ZHAO Jianfeng, LIU Junbo
DOI: 10.19287/j.mtmt.1005-2402.2026.09.012
Abstract PDF
Equivalent reduced-scale modeling-based contact stress analysis and verification for planetary roller screws
QI Baobao, KANG Sheng, CHEN Chuanhai, LIU Zhifeng, YU Lijuan, WU Changjun, ZHENG Jigui, GUO Yaxing
DOI: 10.19287/j.mtmt.1005-2402.2026.09.011
Abstract PDF
Research on testing method for load sharing coefficient of planetary transmission system
LI Yuanyuan, GAO Yong, ZHANG Yalin, ZHANG Qiang
DOI: 10.19287/j.mtmt.1005-2402.2026.09.010
Abstract PDF
Influence of surface material rebound and tool edge geometry parameters on cutting force in ultra-precision machining
NI Xulin, WANG Bing, LIU Zhanqiang, LI Honglu, XIE Zhenwei, YU Zhaoliang
DOI: 10.19287/j.mtmt.1005-2402.2026.09.009
Abstract PDF
A multi-degree-of-freedom nozzle position and orientation control method for system integration of CNC machine tools
GONG Junjie, ZHAO Wei, DENG Ting, LI Jing, LI Liang, ZHAO Guolong
DOI: 10.19287/j.mtmt.1005-2402.2026.09.008
Abstract PDF
Study on cutting deformation of thin-walled TC4 titanium alloy components based on adhesion and retention at the ice interface
ZHANG Hao, ZENG Lingqi, CHENG Lianqi, LIU Tianran, LIU Haibo, WANG Yongqing
DOI: 10.19287/j.mtmt.1005-2402.2026.09.007
Abstract PDF
Online unsupervised tool wear monitoring and application via deep clustering of time series samples
LIU Delin, LIU Zhanqiang, WANG Bing, ZHAO Jinfu, JIANG Aisheng
DOI: 10.19287/j.mtmt.1005-2402.2026.09.006
Abstract PDF
Research progress in five-axis CNC milling for productivity improvement
QIN Xuebin, WAN Min, LI Denghui
DOI: 10.19287/j.mtmt.1005-2402.2026.09.005
Abstract PDF
Experimental setup and procedure for micro-force servo machining using micron-scale forming tools
WANG Jiqiang, DENG Tianyu, YAN Yongda, GENG Yanquan
DOI: 10.19287/j.mtmt.1005-2402.2026.09.004
Abstract PDF
Construction and application verification of dual-robot collaborative machining system for thin-walled cylinder parts with slender ratio
CAO Yansheng, KONG Lingyi, ZHENG Lianyu, LI Pengcheng, LI Feng, ZHOU Sanhe
DOI: 10.19287/j.mtmt.1005-2402.2026.09.003
Abstract PDF
On-machine measurement for ultra-precision single-point turning of large-aperture micro-optical elements based on white-light interferometry
ZHANG Zhe, WU Jinchi, LIU Jiayu, SU Rong, ZHANG Xinquan, REN Mingjun, ZHU Limin
DOI: 10.19287/j.mtmt.1005-2402.2026.09.002
Abstract PDF
Research progress on in-situ measurement technique for dynamic deformation during the cutting process
MA Kai, LIU Zhanqiang, WANG Bing
DOI: 10.19287/j.mtmt.1005-2402.2026.09.001
Abstract PDF
Simulation of gear honing and tooth flank deviation analysis considering machine tool structural deformation
LI Haoyang, HAN Jiang, TIAN Xiaoqing, LI Guanghui, TANG Jianping, XIA Lian
Abstract PDF
Thermal deformation measurement, modeling, and compensation for spindle system components in five-axis horizontal machining center
HE Wentao, LYU Jun, MA Cheng, GE Guangyan, DU Zhengchun
Abstract PDF
A multi-objective flexible job shop scheduling method based on deep reinforcement learning
CHEN Ning, XIONG Wei, WANG Fang
Abstract PDF
Research on optimization of aviation parts machining production line based on value stream analysis
TANG Hui, SU Hongfen
Abstract PDF
Optimization of flexible job shop scheduling problem with alternative process plans based on self-learning grey wolf optimization algorithm
TIAN Jiaquan, HU Tianliang, MA Songhua, FAN Zhiyu
Abstract PDF
Bolt defect detection method based on improved YOLOv11n
ZHANG Tao, ZHANG Yunqi, YAN Jun, XU Jingjing, LIU Zhifeng, YANG Congbin, LI Ying
Abstract PDF
Study on the interchange technology of multi-pallets in horizontal machining centers
LI Jinjie
Abstract PDF
Dynamic characteristics analysis of the gantry structure of a wire laying equipment based on joint contact stiffness
LIU Zhifeng, LIANG Jiaye, LI Ying, ZHANG Tao, SONG Qinghua, CHANG Liang
Abstract PDF
Automated defect detection system for automobile parts manufacturing based on YOLOv5
LIANG Cui, QIN Haoyuan, LUO Chengfeng, CHEN Shoutuan
Abstract PDF
Multi-objective cooperative optimization of ultra-precision machine tools based on topological optimization and the NSGA-II algorithm
HUANG Donghan, HU Chunfu, MIAO Xiandi, LI Maoyuan, BI Guo, WANG Zhenzhong
Abstract PDF
Effect of thermo-vibratory treatment at different temperatures on residual stress in TC21 titanium alloy
XIAO Wentao, YAN Zheng, GAO Xiangsheng, GAO Hanjun, ZHANG Xuewei, ZHAI Jiayou, XIAO Xijun
Abstract PDF
Tool wear monitoring method for titanium alloy curved surface milling based on CTM-MGA
ZHANG Peishuo, WANG Hongjun, YUE Yubin, LIN Tianran
Abstract PDF
Milling chatter monitoring method based on multi-scale feature fusion and triple squeeze-excitation mechanism
GONG Yantong, JIANG Yongxiang, SUN Hongchang, LIANG Zhiqiang
Abstract PDF
An efficient pose estimation method for cabin section assembly holes based on binocular vision
YANG Zhizhao, LI Zhijie, HE Shibin, TAN Hongze, ZHANG Dongfeng, WANG Jinqiang
Abstract PDF
Design of an intelligent chuck system for online monitoring of tool wear in drilling processes
HAN Pinhua, LI Guochao, LEI Jiaojiao, LEI Zhenxi, MING Shoucan, ZHOU Honggen, SHI Xiaona
Abstract PDF
Design of a humanoid robot teleoperation control system for hazardous manufacturing operations
ZHANG Ying, LI Duanjiao, SUN Wenxing, CHEN Yun, ZHOU Lang
Abstract PDF
Optimization method and experimental study on tooth spacing angle of variable pitch milling cutter based on eliminating additional damping
LU Chengyu, WANG Xingchao, ZHANG Jiacheng, LIU Na, YE Hongtao, ZHAO Guolong
Abstract PDF
Study on thread rolling forming and low-temperature fatigue performance of GH2132 bolts with typical specifications
LI Xujian, WANG Shicheng, YAO Yuan, LIU Rui, XIN Gangao, ZHANG Yalong
Abstract PDF
Research on the determination method of four main support positions for horizontal machining centers based on orthogonal experiments
ZHU Jing, DAI Yuhong, SA Renqimuge, LIAO Jingping, JIANG Hua, HE Xuefeng
Abstract PDF
A review of key technologies for CNC machine tools toward intelligent manufacturing
ZHENG Qingchun, WANG Peng, ZHOU Jie, JI Jiaxue, WAN Honghao, WANG Tiegang
Abstract PDF
Review of research progress of flexible assembly technology over the past decade
LIU Zhenlei, YANG Lingfeng, QI Ji, LI Yueyue, DONG Chuanxue, NI Haotian
Abstract PDF
Research status and development trends of heat treatment on defect inhibition in cladding coatings
WANG Jiasheng, SHU Linsen, SONG Rongrong
Abstract PDF
Study of material erosion in magnetic-field-assisted EDM under different polarities
DONG Yinghuai, MA Kangqi, WANG Yan, YAO Ji, SONG Pengyu, LI Wenhui
Abstract PDF
Study on surface integrity and fatigue strengthening mechanism of ultrasonic rolling strengthened superalloy threaded connections
LIANG Long, MA Yong, WANG Wenchao, KANG Genfa, CHEN Yueming, ZHANG Yalong
Abstract PDF
Experimental study of horizontal abrasive flow precision polishing machine tool on shield machine main Bearings
LI Dong, WU Mingyu, WU Xu, SHAO Kesong
Abstract PDF
Lightweight hybrid multi-pin connection of fiber reinforced thermoplastic
YAO Chenxi, ZHANG Chenqun, REN Yuhang, QI Zhenchao
Abstract PDF
Cold expansion strengthening process and fatigue life of load-bearing holes aluminum alloy components
TANG Mingjun, WANG Kun, CHEN Xinghang, GAO Peng, CHEN Zefeng, ZHANG Xiangyu
Abstract PDF
Research on cycloidal gear profile modification optimization of RV reducer based on NSCOA
LI Xuejin, WANG Chunguang
Abstract PDF
Research on variable-generating-speed grinding method of spiral bevel gears based on constant material removal rate
ZHANG Houyu, WANG Zhiyong, ZHANG Yu, YU Shuiqin, WU Kai
Abstract PDF
Optimization of machining parameters for residual stress in internal gear shaping based on the NSGA-II algorithm
FENG Baoyang, ZHANG Fengshou, LI Li
Abstract PDF