column
Research on diagnosis method for gearbox compound fault using a three-stage hybrid feature selection method
ZHANG Xiangfeng, LIU Di, JIANG Hong
2022(10): 5-12. DOI: 10.19287/j.mtmt.1005-2402.2022.10.001
Abstract PDF
Machine tool fault classification and diagnosis based on sound fusion feature and OCSVM
DING Shaohu, ZHANG Ruichen, YANG Chenchen, ZHANG Sen
2022(10): 13-20. DOI: 10.19287/j.mtmt.1005-2402.2022.10.002
Abstract PDF
Gearbox fault diagnosis based on adaptive wavelet noise reduction and Inception networks
CAI Chaozhi, BAI Jinxin, ZHANG Zhonghang, CHI Yaolei
2022(10): 21-28. DOI: 10.19287/j.mtmt.1005-2402.2022.10.003
Abstract PDF
Fault diagnosis of rotating machinery under different operating conditions by joint adaptation of attention depth transfer
XIONG Jun, CHEN Lin
2022(10): 29-37. DOI: 10.19287/j.mtmt.1005-2402.2022.10.004
Abstract PDF
Trajectory planning of 6-DOF industrial robot based on improved particle swarm optimization algorithm
SU Jun, XIONG Ruiping, WEN Jiming, LI Yunqiu, TAN Ping
2022(10): 38-45. DOI: 10.19287/j.mtmt.1005-2402.2022.10.005
Abstract PDF
Research on the influence of industrial robot servo drive system on the performance of the whole machine
DOU Wenjuan, GONG Wei, WANG Xiaoping, WU Zengping, LI Benwang, HUANG Yunfeng
2022(10): 46-53. DOI: 10.19287/j.mtmt.1005-2402.2022.10.006
Abstract PDF
Comparison of attitude capability of 3-PRS parallel mechanism with different chain arrangement
CHEN Guowang, FAN Qiulei, LUO Chao
2022(10): 54-60. DOI: 10.19287/j.mtmt.1005-2402.2022.10.007
Abstract PDF
Station optimization design of an aircraft wing robot spraying system
TAN Hong, LEI Pei, XU Jun, WU Chengxu, LI Xiankun, ZHANG Le, ZHANG Wenguo
2022(10): 61-64. DOI: 10.19287/j.mtmt.1005-2402.2022.10.008
Abstract PDF
Tooth profile chamfering trajectory planning of spiral bevel gears based on ball-end cutter
HU Min, HONG Rongjing, SUN Xiaomin, ZHANG Jiankun, LIN Xiaochuan
2022(10): 65-70. DOI: 10.19287/j.mtmt.1005-2402.2022.10.009
Abstract PDF
Research on modeling method of ball screw contact stiffness considering nonuniform load distribution
CHEN Yongjiang, TANG Wencheng, YUAN Chuangfan, SUN Jingkai
2022(10): 71-79. DOI: 10.19287/j.mtmt.1005-2402.2022.10.010
Abstract PDF
Calculation of power flow and transmission efficiency for planetary gear train considering unbalance load phenomenon
LI Yuanyuan, WANG Yingbo, GAO Wenjin, REN Wei
2022(10): 80-84. DOI: 10.19287/j.mtmt.1005-2402.2022.10.011
Abstract PDF
Research on data acquisition and preprocessing method based on intelligent manufacturing shop
ZHENG Liang, YUAN Minghai, PEI Fengque, GU Wenbin
2022(10): 85-90. DOI: 10.19287/j.mtmt.1005-2402.2022.10.012
Abstract PDF
Intelligent improvement application of multi-axis turning-milling-compound machine tool in the field of aero-engine
ZHANG Chenhong, YU Jianhua
2022(10): 91-96. DOI: 10.19287/j.mtmt.1005-2402.2022.10.013
Abstract PDF
Review of application status of machine tools for machinable parts of high-speed railway
DENG Meizhou, SUN Jianghong, WANG Junjian
2022(10): 97-106. DOI: 10.19287/j.mtmt.1005-2402.2022.10.014
Abstract PDF
Discussion on the boundary nature of standards
WANG Shibin
2022(10): 107-111. DOI: 10.19287/j.mtmt.1005-2402.2022.10.015
Abstract PDF
Introduction to a new generation numeric control system
LU Qijian, LIU Mingdeng, QI Xin
2022(10): 112-118. DOI: 10.19287/j.mtmt.1005-2402.2022.10.016
Abstract PDF
Effect of orifice diameter and bearing clearance on stiffness of ultra-precision conical hydrostatic rotary table
ZHANG Ruitao, LI Zengqiang, YUAN Zixin, LIU Changzai, SUN Tao
2022(10): 119-126. DOI: 10.19287/j.mtmt.1005-2402.2022.10.017
Abstract PDF
Digital twin-driven CNC machine tool virtual commissioning technology study
WANG Jinjiang, NIU Xiaotong, HUANG Zuguang, XUE Ruijuan
2022(10): 127-132. DOI: 10.19287/j.mtmt.1005-2402.2022.10.018
Abstract PDF
Innovative design of vortex induced vibration testing device for underwater manipulator
LIU Xin, DUAN Derong, GAO Changqing, ZHANG Hui, YANG Xuefeng, HAN Qing
2022(10): 133-139. DOI: 10.19287/j.mtmt.1005-2402.2022.10.019
Abstract PDF
Dynamic characteristics analysis for the spindle box of CN gear milling machine and the faceplate
ZHANG Jiankun, HONG Rongjing, XIE Longlong, TONG Zhiwei
2022(10): 140-145. DOI: 10.19287/j.mtmt.1005-2402.2022.10.020
Abstract PDF
Research on adaptive neural fuzzy control of controllable excitation linear synchronous motor
WANG Yingjie, LAN Yipeng
2022(10): 146-151. DOI: 10.19287/j.mtmt.1005-2402.2022.10.021
Abstract PDF
Research and application of feature-based automatic generation technology of 3D process model
ZENG Fenfang, ZHENG Zhizhen
2022(10): 152-156. DOI: 10.19287/j.mtmt.1005-2402.2022.10.022
Abstract PDF
Research on the influence of process parameters on dynamic stability of circular saw blade
LI Liping, ZHUO Liyun, WANG Junchao
2022(10): 157-163. DOI: 10.19287/j.mtmt.1005-2402.2022.10.023
Abstract PDF
Effect of low temperature cutting parameters on cutting force and roughness of nickel-base alloy
HE Haotao, ZHANG Xinwen, LI Jinhui
2022(10): 164-168. DOI: 10.19287/j.mtmt.1005-2402.2022.10.024
Abstract PDF
Prediction and verification analysis of chromium carbide ceramic particle morphology based on first-principles
LIU Chen, LI Jinhua, YAO Fangping, GUO Haihua, CHEN Xiang
2022(10): 169-176. DOI: 10.19287/j.mtmt.1005-2402.2022.10.025
Abstract PDF
A parametric modeling method for convective heat transfer coefficient of numerical control machine tool structure
MAO Xiaobo, SHI Jianmeng, LEI Sheng, MAO Kuanmin
2022(10): 177-182. DOI: 10.19287/j.mtmt.1005-2402.2022.10.026
Abstract PDF
Realization and improvement of gate interlocking function of CNC
LIU Yongjiu, MA Xudong, WANG Wei
2022(10): 183-187. DOI: 10.19287/j.mtmt.1005-2402.2022.10.027
Abstract PDF