column
Study of gas film thickness and its influence on electrochemical discharge machining
LIU Hao, ADAYI Xieeryazidan
2023(10): 9-16. DOI: 10.19287/j.mtmt.1005-2402.2023.10.001
Abstract PDF
Ultrasonic-assisted laser cladding of TiCN nickel-based coating organization and properties
NAN Zhihao, YAO Fangping, LI Chuanyu, HOU Yujie, LI Jinhua
2023(10): 17-21. DOI: 10.19287/j.mtmt.1005-2402.2023.10.002
Abstract PDF
Optimization of of main machining parameters for ultrasonic rolling of iron-based laser cladding layer
ZHOU Ping, WANG Feng
2023(10): 22-27. DOI: 10.19287/j.mtmt.1005-2402.2023.10.003
Abstract PDF
Polar pixel layout method for obtaining the profile of the spiral groove end section of end mill
YOU Minglin
2023(10): 28-34. DOI: 10.19287/j.mtmt.1005-2402.2023.10.004
Abstract PDF
Study on the influence of cutting parameters on the cutting temperature of high-speed milling Stellite6 alloy
CAI Kun, JIANG Zenghui, MU Qiang, LI Minggang, ZHOU Chao
2023(10): 35-40. DOI: 10.19287/j.mtmt.1005-2402.2023.10.005
Abstract PDF
Research on clustering method of resource service cluster in cloud manufacturing
YUAN Minghai, LI Zichen, HUANG Hanyu, PEI Fengque, YU Hongyan
2023(10): 41-47. DOI: 10.19287/j.mtmt.1005-2402.2023.10.006
Abstract PDF
Research on 3D intelligent wiring technology based on improved A* algorithm
ZHU Yonghui, ZHANG Shengwen, ZHI Chenyu, LUO Ruixu, LI Kun
2023(10): 48-53. DOI: 10.19287/j.mtmt.1005-2402.2023.10.007
Abstract PDF
Kinematic performance optimization method of teleoperated robotic arm based on equivalent arm
WANG Xin, ZHAO Jing
2023(10): 54-60. DOI: 10.19287/j.mtmt.1005-2402.2023.10.008
Abstract PDF
Multi-objective cloud manufacturing service composition optimization based on improved NSGA-II algorithm
YUAN Dongwei, FENG Feilong
2023(10): 61-66. DOI: 10.19287/j.mtmt.1005-2402.2023.10.009
Abstract PDF
Research on competitive situation of hot technologies of intelligent manufacturing patent
SUN Yanjiao
2023(10): 67-71. DOI: 10.19287/j.mtmt.1005-2402.2023.10.010
Abstract PDF
Research on lightweight design of grinding wheel rod structure based on multi-objective optimization
ZHANG Zhiyuan, ZHU Xianglong, DONG Zhigang, KANG Renke, ZHANG Lianxin
2023(10): 72-76. DOI: 10.19287/j.mtmt.1005-2402.2023.10.011
Abstract PDF
Experimental study on electro-hydraulic proportional position synchronous active disturbance rejection control based on OPC
LIU Lizhen, ZHAO Zhiyue, WANG Lixin
2023(10): 77-83. DOI: 10.19287/j.mtmt.1005-2402.2023.10.012
Abstract PDF
Study on friction characteristics of ground structured fish scale surface
SUN Tielin, LV Yushan, LI Xingshan
2023(10): 84-89. DOI: 10.19287/j.mtmt.1005-2402.2023.10.013
Abstract PDF
Research on thermal characteristic modeling and cooling system parameter optimization of high-speed motorized spindle
SUN Shuwen, GAO Zhentao, QIAO Yunfei, WANG Junjian
2023(10): 90-97. DOI: 10.19287/j.mtmt.1005-2402.2023.10.014
Abstract PDF
Evaluation of very high cycle fatigue limit of carburized Cr-Ni alloy steel based on long crack growth threshold
YANG Pu, LIU Bing, DENG Hailong, CHEN Yu, KONG Jianhang, YU Huan
2023(10): 98-103. DOI: 10.19287/j.mtmt.1005-2402.2023.10.015
Abstract PDF
Research on self-compensation method for milling cutter side edge wear detection error based on CMOS image sensor
TIAN Chongshun, XU Shixian, LI Guochao, SUN Li, TANG Ying, GUO Shuhao
2023(10): 104-110. DOI: 10.19287/j.mtmt.1005-2402.2023.10.016
Abstract PDF
Study on the application of hole extrusion process in titanium alloy rotary beam
LI Chenghua, WU Mingchun, ZHANG Longkang, CAO Yan, TANG Hecheng, FENG Jianguang
2023(10): 111-115. DOI: 10.19287/j.mtmt.1005-2402.2023.10.017
Abstract PDF
The analysis and discussion of experiment for laser cutting model which is based on dimensional analysis method
DONG Yuchun, WANG Huan, LIU Yijun
2023(10): 116-122. DOI: 10.19287/j.mtmt.1005-2402.2023.10.018
Abstract PDF
Research on NC machining technology of thin-walled aluminum alloy box parts
HAN Jun, DONG Bingyang, SHAO Shuai, SHEN Weidong, PANG Nannan
2023(10): 123-129. DOI: 10.19287/j.mtmt.1005-2402.2023.10.019
Abstract PDF
Research on YOLOv5 casting automatic detection algorithm based on multi-scale feature
WANG Chengjun, XUE Yuke, YANG Chaoyu
2023(10): 130-136. DOI: 10.19287/j.mtmt.1005-2402.2023.10.020
Abstract PDF
Part surface micro defect detection based on BCGS-YOLOv7 tiny
YUAN Meng, SU Gongbing, WANG Jing, ZENG Wenhao
2023(10): 137-144. DOI: 10.19287/j.mtmt.1005-2402.2023.10.021
Abstract PDF
Research on the measurement method of axial geometric parameters of straight groove taps based on vision principle
LI Haoze, LIU Yong, WANG Chen, WANG Hongxia, JIANG Du, GONG Lixiong
2023(10): 145-150, 157. DOI: 10.19287/j.mtmt.1005-2402.2023.10.022
Abstract PDF
Characterization of hardness of stainless steel after laser remelting by laser-induced breakdown spectroscopy
YE Hongji, KONG Linghua, LI Peng, HUANG Xu
2023(10): 151-157. DOI: 10.19287/j.mtmt.1005-2402.2023.10.023
Abstract PDF
Research on in-machine measurement planning based on polychromatic sets theory
HU Sibo, QIAO Hu, ZHANG Li, LI Jihang
2023(10): 158-163. DOI: 10.19287/j.mtmt.1005-2402.2023.10.024
Abstract PDF
Noise reduction of machine tool spindle vibration digital signal based on spectral wavelet threshold
ZHANG Xinwen, ZHOU Miaomiao, LI Jinhui
2023(10): 164-168, 183. DOI: 10.19287/j.mtmt.1005-2402.2023.10.025
Abstract PDF
Current predictive control of controlled excitation linear synchronous motor based on SESO
LI Shang, LAN Yipeng
2023(10): 169-176. DOI: 10.19287/j.mtmt.1005-2402.2023.10.026
Abstract PDF
Thermal key points selection method of a gantry milling machine spindle system based on thermal characteristics simulation
LI Dianxin, HUANG Peng, FENG Pingfa
2023(10): 177-183. DOI: 10.19287/j.mtmt.1005-2402.2023.10.027
Abstract PDF