column
Development of multi-station internal gear electrolytic machining machine tools
LAN Fulin, LI Junfei, LIU Guixian, WU Jiakui, SU Guokang
2023(4): 5-8. DOI: 10.19287/j.mtmt.1005-2402.2023.04.001
Abstract PDF
Temperature field-based equivalent heat source study for short arc discharge machining of C/SiC composites
JI Yu, ZHOU Jianping, WANG Bingbing, QIN Caoyang, TANG Wei
2023(4): 9-14. DOI: 10.19287/j.mtmt.1005-2402.2023.04.002
Abstract PDF
Effect of laser melting and surface texture on tribological properties
ZHAO Changlong, MA Zhenrong, ZHANG Haifeng, DAI Xingyu, SHEN Wenbo
2023(4): 15-20. DOI: 10.19287/j.mtmt.1005-2402.2023.04.003
Abstract PDF
Research and application of intelligent maintenance system for press line based on digital twin technology
YAO Ming, ZHANG Haiming, ZHAO Bing, YAO Lujia, ZHENG Derong
2023(4): 21-27. DOI: 10.19287/j.mtmt.1005-2402.2023.04.004
Abstract PDF
Research on key technologies of flexible clamping under discrete intelligent manufacturing mode
LI Rui, WANG Yongpeng, NAN Boru, YANG Heng, LI Songtao
2023(4): 28-35. DOI: 10.19287/j.mtmt.1005-2402.2023.04.005
Abstract PDF
Design and implementation of informational management and control of electronic equipment assembly line based on internet of things
GUO Lei, ZHANG Hongqi, WU Qianhao, XIE Lingli, ZHOU Zihao
2023(4): 36-43. DOI: 10.19287/j.mtmt.1005-2402.2023.04.006
Abstract PDF
Weld seam recognition method based on fully convolutional neural network
DUAN Yuefei, MA Songhua, HU Tianliang
2023(4): 44-49. DOI: 10.19287/j.mtmt.1005-2402.2023.04.007
Abstract PDF
Collaborative calibration of dual mobile robots based on monocular vision
LI Meiping, LI Jiaan, LIU Hongwei, YU Qiang, LIU Junda, TIAN Wei
2023(4): 50-55. DOI: 10.19287/j.mtmt.1005-2402.2023.04.008
Abstract PDF
Design and experimental analysis of 3D printing nozzle for continuous carbon fiber reinforced composites
LIU Jisheng, WANG Yesong, LI Wei, JIA Zhixin, FANG Pengcheng
2023(4): 56-63. DOI: 10.19287/j.mtmt.1005-2402.2023.04.009
Abstract PDF
Incremental model predictive of PMSM based on sliding mode disturbance observer
XIAO Huiqin, DENG Jingchang, HE Jing, JIA Lin
2023(4): 64-71. DOI: 10.19287/j.mtmt.1005-2402.2023.04.010
Abstract PDF
Research on dimensional redundancy inspection technology of engineering drawings based on the secondary development of SolidWorks
WANG Yanyan, ZHANG Chunyan, LI Kun, ZHANG Shengwen
2023(4): 72-77. DOI: 10.19287/j.mtmt.1005-2402.2023.04.011
Abstract PDF
Research on precision inference of compound biaxial turntable based on Bayesian network
LI Kun, WANG Weiquan, DING Hongchang, HOU Han
2023(4): 78-84. DOI: 10.19287/j.mtmt.1005-2402.2023.04.012
Abstract PDF
Effect of different heat treatment processes on microstructure and tensile properties of superalloy GH4141
SUN Xiaojun, LIU Le, FU Jianjian, YANG Chenhui, SUN Zhiqing, ZHANG Yalong
2023(4): 85-88. DOI: 10.19287/j.mtmt.1005-2402.2023.04.013
Abstract PDF
Research on technology of deformation control for large aluminum alloy ring forging
YU Hangzhuo, HU Boyang, LI Kaiyong, WU Jianjun, LI Xiaoxiang, ZHU Wenhui
2023(4): 89-96. DOI: 10.19287/j.mtmt.1005-2402.2023.04.014
Abstract PDF
Experimental study on optimization of single point grinding process for aspheric mould
HUANG Jing, LONG Qingsong, GAO Rong, ZHANG Gong, ZHOU Hongyan
2023(4): 97-103. DOI: 10.19287/j.mtmt.1005-2402.2023.04.015
Abstract PDF
Research on machining technology of an arm for robot
ZHAO Jiashuo, LIANG Mengqi, ZHENG Yi, GUO Xiuhua, WANG Yongguang
2023(4): 104-108. DOI: 10.19287/j.mtmt.1005-2402.2023.04.016
Abstract PDF
Measurement and processing integration technology based on population algorithm
ZHANG Lianxin, ZHU Xianglong, DONG Zhigang, KANG Renke, PAN Rui, ZHANG Zhiyuan
2023(4): 109-114. DOI: 10.19287/j.mtmt.1005-2402.2023.04.017
Abstract PDF
The dynamic modal analysis and machining verification of high-order aspherical grinder
WU Cuihong, YU Bo
2023(4): 115-120, 125. DOI: 10.19287/j.mtmt.1005-2402.2023.04.018
Abstract PDF
Research on measurement method and equipment of dynamic stiffness of bearing
LV Saisai, HU Yingbei, GAO Fenwu, SUN Jianyong, WANG Huqiang
2023(4): 121-125. DOI: 10.19287/j.mtmt.1005-2402.2023.04.019
Abstract PDF
Research on defect detection of X-ray weld image based on sparse description
WANG Dan, GAO Weixin
2023(4): 126-131. DOI: 10.19287/j.mtmt.1005-2402.2023.04.020
Abstract PDF
Balancing optimization of parallel production lines for group products considering process complexity and employee variance
CHU Yanfeng, GAO Jingang
2023(4): 132-140. DOI: 10.19287/j.mtmt.1005-2402.2023.04.021
Abstract PDF
Information model of extrusion line monitoring system based on OPC UA
WANG Xiaoyou, LIAO Yinghua, WANG Hua
2023(4): 141-147. DOI: 10.19287/j.mtmt.1005-2402.2023.04.022
Abstract PDF
Optimization of job shop scheduling problem based on deep reinforcement learning
QIAO Dongping, DUAN Lvqi, LI Honglei, XIAO Yanqiu
2023(4): 148-155. DOI: 10.19287/j.mtmt.1005-2402.2023.04.023
Abstract PDF
Dynamic complete rescheduling of flexible production shop under order expediting disturbance
WANG Yanyong, ZHANG Yize
2023(4): 156-162. DOI: 10.19287/j.mtmt.1005-2402.2023.04.024
Abstract PDF
Analysis and calculation of dynamic and static thermal characteristics of solid/hollow ball screw
LI Xuexiao, DUAN Mingde, BI Xingrui
2023(4): 163-168. DOI: 10.19287/j.mtmt.1005-2402.2023.04.025
Abstract PDF
Influence of mass and installation location of workpiece on dynamic characteristics of ball screw feed system
WANG Chensheng, FENG Yuhai, SU Fang, WANG Shuwei
2023(4): 169-173. DOI: 10.19287/j.mtmt.1005-2402.2023.04.026
Abstract PDF
Unbalanced convolution network diagnosis of bearing faults under imbalanced samples condition
PEI Honglei
2023(4): 174-180. DOI: 10.19287/j.mtmt.1005-2402.2023.04.027
Abstract PDF