column
Research on milling force of milling 7075 aluminum alloy grooves with ball end milling cutter
LIU Jiaxin, JIANG Zenghui, SHAO Zhongwei, WANG Shuli, GAO Xuyin
2025(8): 9-14. DOI: 10.19287/j.mtmt.1005-2402.2025.08.001
Abstract PDF
Experimental investigation on the surface integrity of U71Mn rail via form-milling
LIU Peijie, LI Pei, QUAN Yanming
2025(8): 15-21. DOI: 10.19287/j.mtmt.1005-2402.2025.08.002
Abstract PDF
Research on the prediction model of titanium alloy cutting vibration based on neural network
JIANG Shuang, SHI Chunjing, LI Jinquan
2025(8): 22-27. DOI: 10.19287/j.mtmt.1005-2402.2025.08.003
Abstract PDF
Rapid prediction and analysis of the static stiffness in the full working space of the CNC gear shaping machine
WU Xiaowei, WANG Wei, LIU Hongda, GUO Yonghao, NIU Wentie
2025(8): 28-36. DOI: 10.19287/j.mtmt.1005-2402.2025.08.004
Abstract PDF
RTCP parameter calibration method for five axis machine tool based on kinematic model
ZHU Wenzhi, SUN Yilan, WANG Pin
2025(8): 37-43. DOI: 10.19287/j.mtmt.1005-2402.2025.08.005
Abstract PDF
The road of manufacturing mode transformation (2)：innovative R&D system
ZHANG Genbao, LUO Tianhong, ZHU Xiao
2025(8): 44-59. DOI: 10.19287/j.mtmt.1005-2402.2025.08.006
Abstract PDF
Research status and challenges of automatic fiber placement equipment and software technology for composite materials
WANG Huaqiao, HAO Qiguo, WANG Xuanjian, WANG Xianfeng
2025(8): 60-68. DOI: 10.19287/j.mtmt.1005-2402.2025.08.007
Abstract PDF
Research on the calibration method of eddy current sensors for measuring composite-type end faces
XIA Tianxiang, DENG Rushen, GU Jianning, CHEN Weihao, CHEN Runlin, ZHA Jun
2025(8): 69-76. DOI: 10.19287/j.mtmt.1005-2402.2025.08.008
Abstract PDF
Component point cloud registration method based on fast and robust-iterative closest point algorithm
XU Hang, SUN Hongchang, LIANG Zhiqiang, JIANG Yongxiang, ZHANG Tianjiang
2025(8): 77-86. DOI: 10.19287/j.mtmt.1005-2402.2025.08.009
Abstract PDF
Simulation research on traction transmission gear modification based on machine learning
LIU Zhichao, HUANG Zhihui, LI Zhihua, YANG Chenglong, CHEN Bingshuo
2025(8): 87-95. DOI: 10.19287/j.mtmt.1005-2402.2025.08.010
Abstract PDF
Application of an optimized minimum noise amplitude deconvolution method in bearing fault diagnosis
ZHANG Zhenjun, CHENG Jiarui, ZHANG Yafei, ZHENG Yanxin
2025(8): 96-103. DOI: 10.19287/j.mtmt.1005-2402.2025.08.011
Abstract PDF
Corner smoothing and trajectory generation algorithm for complex linear toolpaths
DENG Huabo, YU Can
2025(8): 104-111. DOI: 10.19287/j.mtmt.1005-2402.2025.08.012
Abstract PDF
Simulation study of deep hole tapping in TC4 rivet body threads
GUO Shuangshuang, ZHANG Yiding, SHAN Longlong, TANG Wei, LIN Zhongliang, CHEN Yajun
2025(8): 112-121. DOI: 10.19287/j.mtmt.1005-2402.2025.08.013
Abstract PDF
Optimization of 440C stainless steel cylindrical grinding parameters based on RSM and MOGWO
LIAO Xiang, LI Chunyan, HUANG Yisong, WANG Hu, LIANG Bo, PANG Hanwen, CAO Shangwu
2025(8): 122-129. DOI: 10.19287/j.mtmt.1005-2402.2025.08.014
Abstract PDF
Al7075 milling deformation and process parameters of bent thin-walled parts
ZHAO Jiancheng, SUN Hongchang, ZHENG Zhongpeng, JIANG Yongxiang, DENG Sanpeng, JIN Xin, YU Zhongtao
2025(8): 130-139. DOI: 10.19287/j.mtmt.1005-2402.2025.08.015
Abstract PDF
Prediction of energy carbon emission rate in side milling machining and multi-objective optimization of cutting parameters
YAN Xiaolong, GUO Hong, MENG Fanwei, WU Yuxin, LUO Lei
2025(8): 140-148. DOI: 10.19287/j.mtmt.1005-2402.2025.08.016
Abstract PDF
Elastic deformation prediction method for ball screw feed system
SONG Yu, KONG Lingfei, HUANG Zuguang, LI Ke, YANG Shuai, MA Jiahao, YANG Zhen
2025(8): 149-155. DOI: 10.19287/j.mtmt.1005-2402.2025.08.017
Abstract PDF
Research on the calculation method of squareness error between different-type guide rails
ZHAO Weilai, ZHU Xijing, LU Shengli, GUO Jinzhu, KONG Huaye, LIU Yao
2025(8): 156-162. DOI: 10.19287/j.mtmt.1005-2402.2025.08.018
Abstract PDF
Comprehensive control of deformation and surface quality in milling of aerospace aluminum alloy 7075 thin-walled parts
YUE Jinglong, SUN Xingwei, ZHAO Hongxun, LIU Yin, YANG Heran
2025(8): 163-171. DOI: 10.19287/j.mtmt.1005-2402.2025.08.019
Abstract PDF
Thermal error prediction of machine tool spindle based on thermal images
ZHU Yutao, ZHENG Yu, ZHAO Junhao, MU Longtao, PAN Guanting, WANG Ying
2025(8): 172-178. DOI: 10.19287/j.mtmt.1005-2402.2025.08.020
Abstract PDF
Research on batch scheduling problem based on improved artificial rabbits optimization algorithm
QI Xiangbo, WANG Yashuang, TONG Nian, SONG Yan
2025(8): 179-191. DOI: 10.19287/j.mtmt.1005-2402.2025.08.021
Abstract PDF
Optimization algorithm and engineering applications for fishing based on hybrid strategy improvement
LI Yunting, ZHU Liangkuan, ZHAO Hongyang
2025(8): 192-204. DOI: 10.19287/j.mtmt.1005-2402.2025.08.022
Abstract PDF
Service-oriented manufacturing machine tool resource matching and optimal combination selection
JIANG Yuhan, LI Xiang, HUANG Weiling, BAI Honghua, YAO Xinhua
2025(8): 205-215. DOI: 10.19287/j.mtmt.1005-2402.2025.08.023
Abstract PDF