column
Method for error traceability and contour error pre-compensation based on machining process data
WANG Fei, ZHU Sanying, LIU Qiang, XIAO Wenlei, PENG Chong, LYU Shisheng, NING Zhiwei, ZANG Chenxin
2026(4): 5-12. DOI: 10.19287/j.mtmt.1005-2402.2026.04.001
Abstract PDF
A review of the research on intelligent monitoring methods for the condition of key components of machine tools
LI Song, MENG Boyang, XIANG Fuxing, LI Zhongjie, LI Maoyue, LIU Xianli
2026(4): 13-25. DOI: 10.19287/j.mtmt.1005-2402.2026.04.002
Abstract PDF
Research on tool wear monitoring based on Transformer-BiGRU
FU Zizhen, MENG Boyang, LIU Xianli, ZHU Tongjie, SUN Wenxing
2026(4): 26-34. DOI: 10.19287/j.mtmt.1005-2402.2026.04.003
Abstract PDF
Deep learning-driven modeling of dynamic relationships between spindle current and milling forces
MENG Boyang, ZHU Tongjie, SUN Wenxing
2026(4): 35-43. DOI: 10.19287/j.mtmt.1005-2402.2026.04.004
Abstract PDF
Autonomous process optimization for smart machine tools based on geometry-physics-motion collaborative simulation
NIE Pengfei, TU Weiyi, WANG Chenghan, YUE Ting, JIN Sun, WU Jun, ZHANG Jingxian, LI Tian, SHEN Bin
2026(4): 44-51. DOI: 10.19287/j.mtmt.1005-2402.2026.04.005
Abstract PDF
Research on digital process twin manufacturing for propellant grain shaping
GUO Minyu, SUN Mengxue, CAI Yonglin, WANG Jiangtao, LIANG Zhiqiang, WANG Dongqian
2026(4): 52-63. DOI: 10.19287/j.mtmt.1005-2402.2026.04.006
Abstract PDF
Study on the thermal deformation mechanism and process structure control of PLA 4D printed structures based on FDM technology
CHEN Shuyang, CHEN Chuyang
2026(4): 64-75. DOI: 10.19287/j.mtmt.1005-2402.2026.04.007
Abstract PDF
Rapid machining technology for additive manufacturing products based on reverse engineering
ZHAO Wei, LI Jiaxin, HUANG Zhipeng, WANG Ruhua, WANG Zhe, SUN Wei
2026(4): 76-82. DOI: 10.19287/j.mtmt.1005-2402.2026.04.008
Abstract PDF
Thermo-metallurgical-mechanical modeling and experimental validation of laser melting deposition of Ti6Al4V titanium alloy
SONG Yanxuan, LEI Pengyan, YIN Ming
2026(4): 83-93. DOI: 10.19287/j.mtmt.1005-2402.2026.04.009
Abstract PDF
Time-optimal trajectory planning for 6-DOF robotic arms based on improved moss growth optimization algorithm
GU Tao, SHEN Si, ZANG Lilin
2026(4): 94-102. DOI: 10.19287/j.mtmt.1005-2402.2026.04.010
Abstract PDF
Technology for high-precision construction of simulation assembly poses based on multi-robot collaboration
WAN Shubiao, SHEN Yiping, BU Xing, XU Aijie, HONG Haibo, WANG Yuangeng, HE Jun
2026(4): 103-112. DOI: 10.19287/j.mtmt.1005-2402.2026.04.011
Abstract PDF
Minimum coverage area-based robotic arm trajectory optimization for human-robot collaborative assembly workspace
DING Kai, LIU Zhongguan, CHANG Fengtian, ZHANG Yang, ZHANG Fuqiang, JIN Haozhe
2026(4): 113-120. DOI: 10.19287/j.mtmt.1005-2402.2026.04.012
Abstract PDF
Offshore wind farm inspection robot technology and applications
YU Qianxiang, ZHOU Hu, SUN Zhenzhou, WU Ning, ZHU Xialiang, YAN Richun, BI Yunbo
2026(4): 121-134. DOI: 10.19287/j.mtmt.1005-2402.2026.04.013
Abstract PDF
Design and performance of a linkage-spring type constant-pressure accumulator
HUI Yang, NIU Boya, HAN Dong, SHI Hu
2026(4): 135-140. DOI: 10.19287/j.mtmt.1005-2402.2026.04.014
Abstract PDF
Simulation and experimental study of high-strength, high-toughness, low-density steel machining based on AdvantEdge
TIAN Jie, YUAN Juntang, YIN Zengbin, CHENG Yu
2026(4): 141-149. DOI: 10.19287/j.mtmt.1005-2402.2026.04.015
Abstract PDF
Influence of tool oblique angle and secondary cutting feed on deformation mechanism of monocrystalline silicon under elliptic vibration cutting
LI Ding, ZHANG Shiquan, CHI Mei, LI Shunkang, HAN Jinguo
2026(4): 150-158. DOI: 10.19287/j.mtmt.1005-2402.2026.04.016
Abstract PDF
Research on NSDBO/S solution of multi-objective flexible workshop scheduling problem considering machine pre-learning
QI Xiangbo, JIA Xiangyi, LU Yanyan, SONG Yan
2026(4): 159-170. DOI: 10.19287/j.mtmt.1005-2402.2026.04.017
Abstract PDF
Research on the optimized design of CNC lathe bed based on improved neural networks
ZHANG Jian, ZHOU Yongsheng, ZHANG Bo, AI Shiping, MENG Qingling
2026(4): 171-177. DOI: 10.19287/j.mtmt.1005-2402.2026.04.018
Abstract PDF
Simulation study on single abrasive removal of Cu/diamond composites
WANG Henan, LIU Chengwei, SUN Guodong, YU Xiaolin, HUANG Shutao
2026(4): 178-185. DOI: 10.19287/j.mtmt.1005-2402.2026.04.019
Abstract PDF
Research on precision manufacturing technology for low-noise gear transmission in curtain actuators
ZHAO Helong, WANG Bin, WEI Yuqiang, SUN Jianglong, ZHANG Yunxiang, YANG Jianjun
2026(4): 186-192. DOI: 10.19287/j.mtmt.1005-2402.2026.04.020
Abstract PDF
CFD-Based analysis and process parameter study on abrasive flow machining of additively manufactured convergent-divergent feature components
LYU Qian, LI Xiaoming, JIANG Jian
2026(4): 193-198. DOI: 10.19287/j.mtmt.1005-2402.2026.04.021
Abstract PDF
Study on the influence of polishing process parameters of flexible wheel on the surface quality of large-size titanium alloy round hole
YUE Quan, ZHANG Lei, KANG Xiaofeng, MOU Jianwei, ZHOU Xianxin, LI Song
2026(4): 199-207. DOI: 10.19287/j.mtmt.1005-2402.2026.04.022
Abstract PDF
Quality matching optimization of horizontal five-axis machining center based on multi-objective genetic algorithm
XU Lijun, JIANG Erbiao, ZHANG Shizhen, ZHANG Ruiliang, CHEN Hongchang, YANG Shangkun, LI Ang
2026(4): 208-216. DOI: 10.19287/j.mtmt.1005-2402.2026.04.023
Abstract PDF
Investigation on tool wear monitoring method based on mechanism-data fusion
LIU Sheng, XIN Junbo, LIU Qiang, HUANG Hua
2026(4): 217-225. DOI: 10.19287/j.mtmt.1005-2402.2026.04.024
Abstract PDF
Study on the influence of cross-section shape on the cold drawing quality of linear guides
WANG Yanbo, GUO Xin, HAN Xiangyang, WANG Liang, SUN Zao, ZHAO Siyue
2026(4): 226-234. DOI: 10.19287/j.mtmt.1005-2402.2026.04.025
Abstract PDF
A TFOA-BP-based resistance identification method for motorized spindles
LI Peng, LI Hongye, ZHANG Lixiu
2026(4): 235-243. DOI: 10.19287/j.mtmt.1005-2402.2026.04.026
Abstract PDF