Citation: | WANG Xi, HUANG Shutao, XU Lifu, ZHANG Yupu, YU Xiaolin. Experimental study of high-strength steel for high-speed milling AF1410[J]. Manufacturing Technology & Machine Tool, 2022, (1): 124-129. doi: 10.19287/j.cnki.1005-2402.2022.01.023 |
[1] |
田欢乐, 胡洪, 陈海, 等. 超高强度钢在汽车底盘零部件中的设计应用[J]. 汽车实用技术, 2020(7): 58-61, 86.
|
[2] |
张慧萍, 刘壬航, 李珍灿, 等. 300M超高强度钢高速切削过程仿真研究[J]. 机械科学与技术, 2017, 36(10): 1550-1555.
|
[3] |
罗智文, 焦黎, 赵文祥, 等. 58SiMn高强度钢车削表面完整性的试验研究[J]. 表面技术, 2017, 46(1): 234-240. https://www.cnki.com.cn/Article/CJFDTOTAL-BMJS201701038.htm
|
[4] |
Khawaja H, Jahanzaib M, Cheema A. High-speed machining parametric optimization of 15CDV6 HSLA steel under minimum quantity and flood lubrication[J]. Advances in Production Engineering & Management, 2020, 15(4): 403-415.
|
[5] |
Le G, Wei Z, Fei R, et al. Experimental study on surface integrity in cryogenic milling of 35CrMnSiA high-strength steel[J]. The International Journal of Advanced Manufacturing Technology, 2019, 103(1-4): 605-615. doi: 10.1007/s00170-019-03577-6
|
[6] |
Jiang H W, He L, Ren Z W, et al. Prediction of residual stress in the process of turning high strength alloy steel by innovative coated carbide microgroove tools[J]. The International Journal of Advanced Manufacturing Technology, 2020, 106: 4693-4705. doi: 10.1007/s00170-020-04962-2
|
[7] |
Ajaja J, Jomaa W, Bocher P, et al. Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel[J]. The International Journal of Advanced Manufacturing Technology, 2019, 104(1-4): 141-157. doi: 10.1007/s00170-019-03863-3
|
[8] |
Ajaja J, Jomaa W, Bocher P, et al. High cycle fatigue behavior of hard turned 300 M ultra-high strength steel[J]. International Journal of Fatigue, 2020, 131(Feba): 105380.1-105380.12.
|
[9] |
Yang Z C, Xue Y, Li Y, et al. The effect of milling parameters on surface integrity in high-speed milling of ultrahigh strength steel[J]. Procedia CIRP, 2018, 71: 83-88. doi: 10.1016/j.procir.2018.05.076
|
[10] |
张慧萍, 刘壬航, 李珍灿. 300M超高强度钢高速切削过程仿真研究[J]. 机械科学与技术, 2017, 36(10): 1550-1555. https://www.cnki.com.cn/Article/CJFDTOTAL-JXKX201710011.htm
|
[11] |
Akbar F, Arsalan M. Thermal modelling of cutting tool temperatures and heat partition in orthogonal machining of high-strength alloy steel[J]. Proceedings of the Institution pf Mechanical Engineers Part BJournal of Engineering Manufacture, 2021, 235(8): 095440542098608.
|
[12] |
房友飞. 300M超高强度钢高速自组织车削刀具减摩机理的研究[D]. 淄博: 山东理工大学, 2017.
|
[13] |
程红玫, 高有山. 超高强度钢切削仿真和刀具磨损率建模研究[J]. 组合机床与自动化加工技术, 2017(6): 145-149. https://www.cnki.com.cn/Article/CJFDTOTAL-ZHJC201706037.htm
|
[14] |
Guo C S, Zhang C M, Bai H Q, et al. Influence of milling parameters on milling performance of 300M ultra high strength steel[J]. IOP Conference Series: Materials Science and Engineering, 2019, 493(1): 012065.
|
[15] |
罗智文, 焦黎, 赵文祥, 等. 58SiMn高强度钢车削表面完整性的试验研究[J]. 表面技术, 2017, 46(1): 234-240.
|
[16] |
Jin X, Yan F, Yan L, et al. Multiobjective optimization of milling parameters for ultrahigh-strength steel AF1410 based on the NSGA-Ⅱ method[J]. Advances in Materials Science and Engineering, 2020(3): 1-11.
|
[17] |
李鹏军, 黄树涛, 张玉璞, 等. 高速切削AF1410的切削温度有限元仿真分析[J]. 兵器材料科学与工程, 2021, 44(2): 64-70. https://www.cnki.com.cn/Article/CJFDTOTAL-BCKG202102020.htm
|
[18] |
张校雷. 40CrNi2Si2MoVA超高强度钢高速铣削机理研究[D]. 哈尔滨: 哈尔滨理工大学, 2016: 2-3.
|
[19] |
李强, 郭辰光, 赵丽娟, 等. DD5镍基单晶高温合金高速铣削判据及切屑毛边成形机理研究[J]. 中国机械工程, 2020, 31(19): 2388-2393. doi: 10.3969/j.issn.1004-132X.2020.19.016
|
[20] |
赵先锋, 姜雪婷, 史红艳, 等. 切削速度对钛合金切屑形貌和剪切带的影响研究[J]. 机械设计与制造, 2020(10): 171-175. https://www.cnki.com.cn/Article/CJFDTOTAL-JSYZ202010041.htm
|
[21] |
何宁. 高速切削技术[M]. 上海: 上海科学技术出版社, 2012: 38-41.
|