Citation: | LI Lingxiao, CHENG Qunlin, PING Hao, YUAN Zhendi, YE Lei. Mechanical dynamics modeling and analysis of the special machine for vertical inner cavity[J]. Manufacturing Technology & Machine Tool, 2022, (8): 14-20. doi: 10.19287/j.mtmt.1005-2402.2022.08.002 |
[1] |
刘宏. 锥体内腔多轴数控铣削加工工艺技术[J]. 制造业自动化, 2019, 41(9): 144-148. doi: 10.3969/j.issn.1009-0134.2019.09.033
|
[2] |
刘彪. 薄壁件铣削稳定性与动态加工误差研究[D]. 北京: 北京理工大学, 2015.
|
[3] |
Zhang G, Huang Y, Shi W. Predicting dynamic behaviours of a whole machine tool structure based on computer-aided engineering[J]. International Journal of Machine Tools and Manufacture, 2003(40): 699-706.
|
[4] |
张广鹏, 史文浩, 黄玉美. 机床导轨结合部的动态特性解析方法及其应用[J]. 机械工程学报, 2013, 38(10): 114-117.
|
[5] |
Liu H, Sun Y, Liu Z. Simulation and experiment of dynamic properties of joint surfaces based on fractal theory[J]. Shock and Vibration, 2015(9): 21-29.
|
[6] |
王书亭, 李杰, 刘涛, 等. 机械固定结合面刚度特性建模[J]. 华中科技大学学报:自然科学版, 2011, 39(8): 26-31.
|
[7] |
周石恩. 基于数字孪生的复杂产品装配建模与精度分析方法[D]. 杭州: 浙江大学, 2019.
|
[8] |
廖伯瑜, 周新民, 尹志宏. 现代机械动力学及工程应用[M]. 北京: 机械工业出版社, 2004.
|
[9] |
毛宽民, 李斌, 雷声. 机床结合部动力学建模及应用[M]. 武汉: 武汉理工大学出版社, 2018.
|
[10] |
李景奎, 石宏, 郭建烨. 基于有限元机床导轨结合面参数的特性分析[J]. 航空制造技术, 2013(5): 92-94.
|
[11] |
Huang Y M, Fu W P, Dong L X. Research on thenormal dynamic characteristic parameters of jointsurface[J]. Journal of Mechanical Engineering, 1993, 22(3): 54-55.
|
[12] |
Wu J S S, Chang J C, Hung J P. The effect of contactinterface on dynamic characteristics of compositestructures[J]. Mathematics and Computers in Simulation, 2007, 41(6): 13-19.
|
[13] |
蒋书运, 祝书龙. 带滚珠丝杠副的直线导轨结合部动态刚度特性[J]. 机械工程学报, 2010, 46(1): 92-93.
|
[14] |
屈重年, 伍良生, 肖毅川, 等. 机床导轨技术研究综述[J]. 制造技术与机床, 2012(1): 30-36. doi: 10.3969/j.issn.1005-2402.2012.01.010
|
[15] |
张景. 动力学系统建模[M]. 北京: 国防工业出版社, 2000.
|
[16] |
王玉宝. 五轴联动数加工中心结构动特性分析与优化[D]. 天津: 天津大学, 2010.
|