Issue 2
Jan.  2023
Turn off MathJax
Article Contents
Article Navigation >  Manufacturing Technology & Machine Tool  > 2023  >  (2): 46-51
HAO Yongxing, WEI Yabo, GAO Yuanhao, SONG Yipeng, LIU Yahui. Study on the increment forming properties of TA1 sheet based on ultrasonic assistance[J]. Manufacturing Technology & Machine Tool, 2023, (2): 46-51. doi: 10.19287/j.mtmt.1005-2402.2023.02.006
Citation: HAO Yongxing, WEI Yabo, GAO Yuanhao, SONG Yipeng, LIU Yahui. Study on the increment forming properties of TA1 sheet based on ultrasonic assistance[J]. Manufacturing Technology & Machine Tool, 2023, (2): 46-51. doi: 10.19287/j.mtmt.1005-2402.2023.02.006
shu

Study on the increment forming properties of TA1 sheet based on ultrasonic assistance

doi: 10.19287/j.mtmt.1005-2402.2023.02.006

  • College of Materials, North China University of Water Resources and Electric Power, Zhengzhou 450045, CHN

  • Received Date: 2022-10-31
  • Accepted Date: 2022-12-16
    Abstract
  • Titanium and its alloys are widely used in various fields because of their advantages such as low density, high specific strength and good biocompatibility. In this paper, the ultrasonic assisted incremental forming process was applied to the TA1 incremental forming process of titanium alloy plate, using ABAQUS finite element software simulation of ultrasonic assisted incremental forming process. And the reason of the forming force reducing in the forming process was analyzed, the influence of different vibration parameters and process parameters on forming force of TA1 titanium alloy sheet was studied. The results show that ultrasonic vibration can significantly reduce the forming force, which provides relevant basis for the application of ultrasonic vibration in the increment forming of TA1 titanium alloy sheet. It is of great significance to expand the application of titanium alloy sheet increment forming process.

     

    • FullText(HTML)
  • loading
    • References(17)
  • [1]
    Duflou J R, Habraken A M, Cao J, et al. Single point incremental forming: state-of-the-art and prospects[J]. International Journal of Material Forming, 2018, 11(6): 743-773. doi: 10.1007/s12289-017-1387-y
    [2]
    Kumar A, Gulati V, Kumar P, et al. Forming force in incremental sheet forming: a comparative analysis of the state of the art[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41(6): 1-45.
    [3]
    Mohanty S, Regalla S P, Daseswara Rao Y V. Robot-assisted incremental sheet metal forming under the different forming condition[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41(2): 1-12.
    [4]
    Liu Z, Daniel W J T, Li Y, et al. Multi-pass deformation design for incremental sheet forming: analytical modeling, finite element analysis and experimental validation[J]. Journal of Materials Processing Technology, 2014, 214(3): 620-634. doi: 10.1016/j.jmatprotec.2013.11.010
    [5]
    Mohammadi A, Vanhove H, Van Bael A, et al. Towards accuracy improvement in single point incremental forming of shallow parts formed under laser assisted conditions[J]. International Journal of Material Forming, 2016, 9(3): 339-351. doi: 10.1007/s12289-014-1203-x
    [6]
    Saidi B, Giraud Moreau L, Mhemed S, et al. Hot incremental forming of titanium human skull prosthesis by using cartridge heaters: a reverse engineering approach[J]. The International Journal of Advanced Manufacturing Technology, 2019, 101(1): 873-880.
    [7]
    敖冬威. Ti-6Al-4V 钛合金板材电脉冲辅助单点渐进成形研究[D]. 济南: 山东大学, 2019.
    [8]
    高铁军, 王旭, 刘少青, 等. TA2钛合金圆筒件超声振动辅助拉深丁艺研究[J]. 兵器材料科学与工程, 2021, 44: 8-12.
    [9]
    王伟国. 超声振动辅助纯铜微镦粗实验与模拟研究[D]. 济南: 山东大学, 2019.
    [10]
    Liu S, Shan X B, Guo K, et al. Experimental study on titanium wire drawing with ultrasonic vibration[J]. Ultrasonics, 2018, 83: 60-67. doi: 10.1016/j.ultras.2017.08.003
    [11]
    Hu J, Shimizu T, Yang M. Investigation on ultrasonic volume effects: Stress superposition, acoustic softening and dynamic impact[J]. Ultrasonics Sonochemistry, 2018, 48: 240-248. doi: 10.1016/j.ultsonch.2018.05.039
    [12]
    Li Y L, Wang Z J, Zhai W D, et al. The influence of ultrasonic vibration on parts properties during incremental sheet forming[J]. Advances in Manufacturing, 2021, 9(2): 250-261. doi: 10.1007/s40436-021-00347-0
    [13]
    Yang M, Bai L, Li Y, et al. Influences of vibration parameters on formability of 1060 aluminum sheet processed by ultrasonic vibration-assisted single point incremental forming[J]. Advances in Materials Science and Engineering, 2019, 2019:1-12.
    [14]
    Alharbi N. Experimental study on designing optimal vibration amplitude in ultrasonic assisted incremental forming of AA6061-T6[J]. Engineering Science and Technology, an International Journal, 2022, 30: 101041. doi: 10.1016/j.jestch.2021.07.004
    [15]
    Yao Z M, Bai L, Liang X M, et al. Experimental and numerical study of forming force in ultrasonic vibration single point incremental forming[J]. Ferroelectrics, 2022, 596(1): 27-38. doi: 10.1080/00150193.2022.2087247
    [16]
    Gohil A, Modi B, Patel K. Effect of amplitude of vibration in ultrasonic vibration-assisted single point incremental forming[J]. Materials and Manufacturing Processes, 2022: 1-13.
    [17]
    翟维东. 铝合金薄板超声辅助渐进成形表面质量及表面材料流动特性探究[D]. 济南: 山东大学, 2020.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(18)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (85) PDF downloads(487) Cited by()
    Proportional views
    Related
    订阅号
    服务号
    微店

    Copyright © 2018 《 Manufacturing Technology & Machine Tool》

    Address: No.4 Wangjing Road, Chaoyang District, BeijingTel: 010-64739683/79Email: edit@jcs.gt.cn

    Supported by: Beijing Renhe Information Technology Co., Ltd.    

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return