Citation: | XIONG Zhe, MIN Chengzhi, XU Guoda, YANG Zhe, LV Zifeng, XIE Zhongqu, SUN Yuxin, WANG Yulin. Mobile tool failure inspection system[J]. Manufacturing Technology & Machine Tool, 2023, (6): 146-151. doi: 10.19287/j.mtmt.1005-2402.2023.06.024 |
[1] |
邓晓鹏, 胡小锋. 基于机器视觉的车铣刀具磨损检测方法[J]. 组合机床与自动化加工技术, 2022(10): 105-108,114.
|
[2] |
贾冰慧. 基于机器视觉的刀具状态在机检测关键技术研究[D]. 广州: 华南理工大学, 2014.
|
[3] |
Kious M, Ouahabi A, Boudraa M, et al. Detection process approach of tool wear in high speed milling[J]. Measurement, 2010, 43(10): 1439-1446. doi: 10.1016/j.measurement.2010.08.014
|
[4] |
辛元超. 刀具磨损参数检测技术研究[D]. 西安: 西安工业大学, 2016.
|
[5] |
潘盛湖, 徐尚飞, 刘剑, 等. 刀具振动无线检测系统研究[J/OL]. 机械科学与技术: 1-9. [2023-02-28]. https://doi.org/10.13433/j.cnki.1003-8728.20230006.
|
[6] |
谢亮, 刘众, 谢赛. 基于主轴功率的刀具在线监测系统[J]. 现代制造技术与装备, 2022, 58(4): 151-155.
|
[7] |
Nouri M, Fussell B K, Ziniti B L, et al. Real-time tool wear monitoring in milling using a cutting condition independent method[J]. International Journal of Machine Tools and Manufacture, 2015, 89: 1-13. doi: 10.1016/j.ijmachtools.2014.10.011
|
[8] |
宾頔. 二维超声振动与切削力检测集成刀具系统设计研究[D]. 哈尔滨: 哈尔滨工业大学, 2019.
|
[9] |
Zhong Z W, Zhou J H, Win Y N. Correlation analysis of cutting force and acoustic emission signals for tool condition monitoring[C]. 2013 9th Asian Control Conference (ASCC). IEEE, 2013: 1-6.
|
[10] |
王利强, 李绍朋, 吕志杰. 刀具失效状态监测研究综述[J]. 机电技术, 2019, 125(4): 110-114.
|
[11] |
宋伟. 基于声发射检测的旋转超声加工中金刚石磨头磨损的研究[D]. 泉州: 华侨大学, 2021.
|
[12] |
彭锐涛, 降皓鉴, 徐莹, 等. 刀具磨损的机器视觉监测研究[J]. 机械科学与技术, 2019, 38(8): 1257-1263.
|
[13] |
王冲冲. 基于高精度计算机视觉的刀具磨损在位检测[D]. 上海: 东华大学, 2014. .
|
[14] |
Wu X, Liu Y, Zhou X, et al. Automatic identification of tool wear based on convolutional neural network in face milling process[J]. Sensors, 2019, 19(18): 3817. doi: 10.3390/s19183817
|
[15] |
Liu S, Deng W. Very deep convolutional neural network based image classification using small training sample size[C]. 2015 3rd IAPR Asian Conference on Pattern Recognition (ACPR). IEEE, 2015: 730-734.
|
[16] |
黎胜明. 钛合金TC4车削的刀具磨损在线监测技术的研究[D]. 哈尔滨: 哈尔滨工业大学, 2014.
|
[17] |
毛一砚, 姜振喜, 朱绍维, 等. 方肩铣刀铣削钛合金腹板崩刃识别算法研究[J]. 制造技术与机床, 2022(11): 78-83. doi: 10.19287/j.mtmt.1005-2402.2022.11.012
|
[18] |
郑良, 苑明海, 裴凤雀, 等. 智能制造车间数据采集和预处理方法研究[J]. 制造技术与机床, 2022(10): 85-90.
|