column
An improved approach law for PMSM non-singular terminal sliding mode control
YANG Songlin, CHEN Tianhao, LIU Qihang, WANG Kun, CHEN Shaohua
2024(4): 5-12. DOI: 10.19287/j.mtmt.1005-2402.2024.04.001
Abstract PDF
Research on cogging torque of disk motor based on stator structure optimization
YUE Mingqiang, LIU Cheng, WANG Xiaoguang
2024(4): 13-18. DOI: 10.19287/j.mtmt.1005-2402.2024.04.002
Abstract PDF
Speed sensorless fuzzy adaptive PI direct torque control of asynchronous motor
WEN Hanbin, CUI Yanliang
2024(4): 19-25. DOI: 10.19287/j.mtmt.1005-2402.2024.04.003
Abstract PDF
Simulation and experimental of array microtexturing based on porous nozzle technology
CHEN Chaoda, WU Shaofang, SHAN Liang, LI Kangxing, ZOU Baojian, WU Siyang
2024(4): 26-32. DOI: 10.19287/j.mtmt.1005-2402.2024.04.004
Abstract PDF
Impact toughness analysis of Q355/SKH9 HSS laser refrequency welded joint
SUN Shuang, XU Guizhen, LIU Guanjun
2024(4): 33-37. DOI: 10.19287/j.mtmt.1005-2402.2024.04.005
Abstract PDF
Research on welding seam extraction based on PCA-DBSCAN
GUO Ao, JING Huicheng, GE Chao, DI Zhigang
2024(4): 38-43. DOI: 10.19287/j.mtmt.1005-2402.2024.04.006
Abstract PDF
Research on GMAW seam tracking system based on arc sensor
YANG Yuanzhou, XUE Ruilei, LIU Hongsheng, XIA Lei
2024(4): 44-50. DOI: 10.19287/j.mtmt.1005-2402.2024.04.007
Abstract PDF
Finite element analysis of cutting process and surface formation of SiCp/Al composites under conventional and ultrasonic vibration assisted conditions
MA Guohong, ZHANG Jiali, YAN Fan, SHI Hexi, LIU Li
2024(4): 51-56. DOI: 10.19287/j.mtmt.1005-2402.2024.04.008
Abstract PDF
Research on gullet -to-chip area ratio and chip morphology of TC32 titanium alloy BTA deep hole drilling based on deep learning
FENG Yazhou, TAO Michen, LIU Zhanfeng, KONG Hao
2024(4): 57-62. DOI: 10.19287/j.mtmt.1005-2402.2024.04.009
Abstract PDF
Influence of the grinding process parameters on the SiCp/Althree-dimensional Roughness
WANG Shaolei, ZHANG Liying, LIANG Youyu, WU Haibao
2024(4): 63-70. DOI: 10.19287/j.mtmt.1005-2402.2024.04.010
Abstract PDF
Simulation study of block press molding of Al-Fe metals with different morphologies
LI Zhenliang, WANG Xin
2024(4): 71-77. DOI: 10.19287/j.mtmt.1005-2402.2024.04.011
Abstract PDF
Experimental study on the material removal mechanism in ultrasonic assisted grinding of zirconia ceramics
CUI Fangfang, DING Kai, LIU Sheng, LI Qilin, HE Bin
2024(4): 78-83. DOI: 10.19287/j.mtmt.1005-2402.2024.04.012
Abstract PDF
Research on active disturbance rejection control of fast tool positioning table based on piezoelectric drive
HU Gaofeng, LU Junti
2024(4): 84-89. DOI: 10.19287/j.mtmt.1005-2402.2024.04.013
Abstract PDF
Development of a single-axis direct drive CNC rotary table
ZHANG Guangguang
2024(4): 90-93. DOI: 10.19287/j.mtmt.1005-2402.2024.04.014
Abstract PDF
Research on non-destructive clamping and precise posture adjustment of thermal protection barrels
CHEN Tao, YI Yali, YANG Yuandan, YANG Zeyu, CAI Hu, SHAO Lei
2024(4): 94-99. DOI: 10.19287/j.mtmt.1005-2402.2024.04.015
Abstract PDF
Corrosion mechanism of aviation aluminum alloy during machining process
YUAN Shihua, WANG Yu, XU Qiang, LI Lianyu, DAI Yuanjing
2024(4): 100-106. DOI: 10.19287/j.mtmt.1005-2402.2024.04.016
Abstract PDF
Optimization of milling parameters considering surface quality and hardness of screw rotor
LIN Zeli, SUN Xingwei, YANG Heran, LIU Yin, ZHAO Hongxun
2024(4): 107-112. DOI: 10.19287/j.mtmt.1005-2402.2024.04.017
Abstract PDF
Fabrication of DLP light-curing 3D printer based on investment casting
YAN Yu, LAN Xi, MA Qian, WANG Xinying, WANG Zhongjie, DING Yunfei
2024(4): 113-118. DOI: 10.19287/j.mtmt.1005-2402.2024.04.018
Abstract PDF
Design of the integrated forming and turning device for the bottom of box without bottom holes
YANG Zhongbao, ZHANG Jie, FANG Haodi, XIAO Benkang, WANG Weixin
2024(4): 119-124, 147. DOI: 10.19287/j.mtmt.1005-2402.2024.04.019
Abstract PDF
Research and application of secondary drawing technology for the waist line of automobile rear door skin
ZHANG Chunbo, CHEN Junwei, JIANG Lei, MA Peibing, LI Guowei
2024(4): 125-131. DOI: 10.19287/j.mtmt.1005-2402.2024.04.020
Abstract PDF
Tracing, modeling, and real-time compensation of thermal error in precision horizontal lathe
LV Jun, MA Cheng, DONG Jianjun, GE Guangyan, DU Zhengchun
2024(4): 132-139. DOI: 10.19287/j.mtmt.1005-2402.2024.04.021
Abstract PDF
A spatial error modeling method under the influence of multiple error factors
GENG Ruihan, TAO Haohao, LI Tongjie, FAN Jinwei, HUANG Cheng
2024(4): 140-147. DOI: 10.19287/j.mtmt.1005-2402.2024.04.022
Abstract PDF
Rapid identification method considering volumetric position differences of linear axis positioning error in machine tools
LIU Chuanjin, YAO Sihan, GAO Weiguo
2024(4): 148-152. DOI: 10.19287/j.mtmt.1005-2402.2024.04.023
Abstract PDF
Workpiece recognition and detection algorithm based on improved YOLOv5s
YU Lang, MIAO Hongbin, SU Hepeng, SHEN Guangpeng
2024(4): 153-158, 180. DOI: 10.19287/j.mtmt.1005-2402.2024.04.024
Abstract PDF
Research on the construction of digital workshop for machine tool processing
JIANG Xuekun, ZHAO Qinzhi, WANG Junjian, GAO Xue, WANG Xiangqin, HUANG Hao
2024(4): 159-166. DOI: 10.19287/j.mtmt.1005-2402.2024.04.025
Abstract PDF
Research on flexible job-shop scheduling based on improved genetic algorithm
JIN Qiu, WANG Qingyan, YUAN Bowen
2024(4): 167-172. DOI: 10.19287/j.mtmt.1005-2402.2024.04.026
Abstract PDF
Method of determining the importance of customer demand in product service system design
LV Feng, LIU Fen, FENG Zhuangzhuang, ZHANG Shuping, ZHAO Zilu, LV Ling
2024(4): 173-180. DOI: 10.19287/j.mtmt.1005-2402.2024.04.027
Abstract PDF
Improved genetic algorithm for flexible flow shop scheduling
XU Jiaqi, TIAN Ye
2024(4): 181-187. DOI: 10.19287/j.mtmt.1005-2402.2024.04.028
Abstract PDF
Research on real-time multi-task scheduling for distributed 3D printing services
ZHAO Junfu, DU Haiyuan, JIN Yongsheng, LI Jianjun
2024(4): 188-195. DOI: 10.19287/j.mtmt.1005-2402.2024.04.029
Abstract PDF