column
Research on the cutting force of machining the tunnel in titanium alloy integral impeller by plunge milling
GAO Xuyin, JIANG Zenghui, WANG Shuli, ZHANG Ying, DAI Wenshun
2024(6): 5-10. DOI: 10.19287/j.mtmt.1005-2402.2024.06.001
Abstract PDF
Research on the clamping layout and machining parameters of thin-walled frame parts
ZHANG Xinyun, DONG Jian, CAO Yan, WANG Zexiao, GENG Nan
2024(6): 11-17. DOI: 10.19287/j.mtmt.1005-2402.2024.06.002
Abstract PDF
Effect of laser parameters on microstructure and properties of H13 steel surface quenched layer
MING Zhi, YAO Fangping, JIANG Chuanxi, WANG Qilai, HUO Shiwen
2024(6): 18-24. DOI: 10.19287/j.mtmt.1005-2402.2024.06.003
Abstract PDF
Research on the performance of short electric arc drilling process of TC4 titanium alloy
FU Fei, HU Guoyu, ZHANG Shengsheng, WANG Jiahao, ZHOU Jianping
2024(6): 25-32. DOI: 10.19287/j.mtmt.1005-2402.2024.06.004
Abstract PDF
Improved A* algorithm for path planning of mobile robot
JIANG Chengjie, ZHU Hua, XIE Yao, WANG Hongxing
2024(6): 33-36, 73. DOI: 10.19287/j.mtmt.1005-2402.2024.06.005
Abstract PDF
Kinematic analysis and simulation of the 8R robotic arm based on Matlab
REN Jianhua, WANG Jian, FENG Zemin
2024(6): 37-43. DOI: 10.19287/j.mtmt.1005-2402.2024.06.006
Abstract PDF
An assembly part identification and localization method based on deep learning
SHENG Bin, WANG Chensheng
2024(6): 44-51. DOI: 10.19287/j.mtmt.1005-2402.2024.06.007
Abstract PDF
Rolling bearing fault diagnosis based on residual network and multi-scale feature fusion
FAN Liping, ZHANG Han
2024(6): 52-57. DOI: 10.19287/j.mtmt.1005-2402.2024.06.008
Abstract PDF
Bearing early fault feature extraction with adaptive weighted Savitzky-Golay filtering
DING Yi, LIU Tao, WANG Zhenya
2024(6): 58-66. DOI: 10.19287/j.mtmt.1005-2402.2024.06.009
Abstract PDF
Based on secondary-sequence meta-learning for bearing intelligent fault diagnosis
OUYANG Chengda, QI Tiechen, WANG Jie, LI Xiaojia
2024(6): 67-73. DOI: 10.19287/j.mtmt.1005-2402.2024.06.010
Abstract PDF
Fault diagnosis of rolling bearing under adaptive attention LSTM-ResNet
JIANG Jian, WEI Xiaoyuan
2024(6): 74-81. DOI: 10.19287/j.mtmt.1005-2402.2024.06.011
Abstract PDF
Review on parameter identification and error compensation methods based on LuGre friction mode
LI Zhongqun, OUYANG Zhinan, ZENG Chaopeng, SUN Jiancong, ZHU Sijia
2024(6): 82-88. DOI: 10.19287/j.mtmt.1005-2402.2024.06.012
Abstract PDF
A review of advances in milling characterization and surface integrity of additively manufactured materials
ZHAO Changlong, MA Hongnan, JIA Xiaoyu, ZHAO Qinxiang, DU Weilong, YU Zice
2024(6): 89-94, 132. DOI: 10.19287/j.mtmt.1005-2402.2024.06.013
Abstract PDF
Composite speed control for PMSM based on varying speed reaching law
ZHU Xiaobing, WANG Zhonggen, GAO Xiaosong
2024(6): 95-101. DOI: 10.19287/j.mtmt.1005-2402.2024.06.014
Abstract PDF
Fractal theoretical modeling of loading contact characteristics of machine tool joint interfaces considering interaction between asperities
WANG Yanhui, GUO Qiang, SUN Wan, ZHANG Xueliang
2024(6): 102-107. DOI: 10.19287/j.mtmt.1005-2402.2024.06.015
Abstract PDF
Research on friction mechanism of TC4 titanium alloy bolt based on different surface states
GAO Xuemin, YAO Jiange, FENG Shaowei, FENG Derong, SHEN Peng, GUO Chaoyue
2024(6): 108-113. DOI: 10.19287/j.mtmt.1005-2402.2024.06.016
Abstract PDF
Numerical simulation of the initial feed stage in additive friction stir deposition for AA2219-T8
YANG Tianhao, WANG Nuo, GUO Weicheng, DAI Yuancheng
2024(6): 114-120. DOI: 10.19287/j.mtmt.1005-2402.2024.06.017
Abstract PDF
The edge rounding milling process and its parameter optimization
ZHANG Yun, LIU Jingqing, XU Zhiyong, CHENG Geng
2024(6): 121-125. DOI: 10.19287/j.mtmt.1005-2402.2024.06.018
Abstract PDF
Optimization design of grinding parameters for aviation curvic coupling with annular groove
PENG Zuyuan, WANG Zhiyong, ZHANG Yu, WU Kai
2024(6): 126-132. DOI: 10.19287/j.mtmt.1005-2402.2024.06.019
Abstract PDF
Improved YOLOv7-tiny algorithm for surface defect detection of bushing parts
LI Dawei, SUN Yilan, WANG Pin, YE Mingliang
2024(6): 133-140. DOI: 10.19287/j.mtmt.1005-2402.2024.06.020
Abstract PDF
Fatigue strength prediction model of TC4 welded joint based on fatigue crack feature size
CHEN Yu, YANG Pu, KONG Jianhang, YU Huan, LIU Jie, DENG Hailong
2024(6): 141-146. DOI: 10.19287/j.mtmt.1005-2402.2024.06.021
Abstract PDF
Development of machine tool remanufacturability program evaluation system based on relative entropy-TOPSIS
GUO Xiuzhen, GONG Qingshan, LIU Min, JIANG Zhigang, CAO Zhanlong, CHEN Junwen
2024(6): 147-152. DOI: 10.19287/j.mtmt.1005-2402.2024.06.022
Abstract PDF
The optimization of YOLOv5 algorithm for detecting surface defects on hot rolled strips
MA Dongmei, ZHU Jiahao
2024(6): 153-160. DOI: 10.19287/j.mtmt.1005-2402.2024.06.023
Abstract PDF
Research on energy-saving scheduling of job shop based on deep reinforcement learning
LI Zichen, YUAN Minghai, HUANG Hanyu, PEI Fengque
2024(6): 161-169. DOI: 10.19287/j.mtmt.1005-2402.2024.06.024
Abstract PDF
Multi-contradictory-objective optimization scheduling of logistics resources under production process constraints
ZHU Xiaojing, ZHANG Jie
2024(6): 170-176. DOI: 10.19287/j.mtmt.1005-2402.2024.06.025
Abstract PDF
Dynamic characteristics analysis and vibration suppression optimization of motorized spindle of horizontal five-axis CNC machine tool
MA Cheng, SHAO Jiaxuan
2024(6): 177-182. DOI: 10.19287/j.mtmt.1005-2402.2024.06.026
Abstract PDF
Automatic rivet tightening device for multi-specification turntable bearing assemblies
WANG Kai, HAN Yinping, JA Chang’an, HUANG Shengjun
2024(6): 183-188. DOI: 10.19287/j.mtmt.1005-2402.2024.06.027
Abstract PDF