column
Experimental study on the stability of low-speed motion of a novel hybrid rotary table
WANG Yunxin, MA Jinkui, CHEN Shujiang, LU Changhou, NIE Yulong
2021(2): 13-17. DOI: 10.19287/j.cnki.1005-2402.2021.02.001
Abstract PDF
Analysis and test of sealing performance of pneumatic balancer O-ring seal
SHAO Ruiying, WANG Hongjun, SONG Juan, GE Weiwei
2021(2): 18-23. DOI: 10.19287/j.cnki.1005-2402.2021.02.002
Abstract PDF
Dynamic characteristics of double-pad aerostatic bearings with pocketed orifices
ZHAO Pengning, YANG Guangwei, ZHANG Min, WANG Hu, YANG Hong, LIU Youhai
2021(2): 23-28. DOI: 10.19287/j.cnki.1005-2402.2021.02.003
Abstract PDF
Research on crankshaft follow-up grinding method based on variable speed movement of headstock spindle
FAN Jinwei, LI Chenbao, LI Weihua, XIE Bentian
2021(2): 29-31, 35. DOI: 10.19287/j.cnki.1005-2402.2021.02.004
Abstract PDF
The state detection of CNC machine tool's feed axis based on PCA feature extraction and drive current
FU Yaohuimei, XU Qiang, CHEN Xuezhen
2021(2): 32-35. DOI: 10.19287/j.cnki.1005-2402.2021.02.005
Abstract PDF
Research on vision-based robot's grabbing attitude for scattered stacking workpieces
CUI Xudong, TAN Huan, WANG Pingjiang, YU Lingbo, CHEN Jihong
2021(2): 36-41. DOI: 10.19287/j.cnki.1005-2402.2021.02.006
Abstract PDF
A comparative study on the development strategies of the world's major scientific and technological powers
SU Zheng, LI Li
2021(2): 42-45, 50. DOI: 10.19287/j.cnki.1005-2402.2021.02.007
Abstract PDF
Design and application of special support frame for machining large diameter thin-walled cylinder parts
FENG Pengsheng, YANG Aiping, WANG Lipeng, WANG Jiangyong, LI Qing
2021(2): 46-50. DOI: 10.19287/j.cnki.1005-2402.2021.02.008
Abstract PDF
Terminal sliding mode robust control for manipulator based on adaptive neural network
WANG Rui, CHEN Shuli, WANG Donghui
2021(2): 51-57. DOI: 10.19287/j.cnki.1005-2402.2021.02.009
Abstract PDF
Dynamic characteristics analysis of the main structure of lightweight gantry laser processing machine
DU Yang, ZHAO Kai, DENG Wenjing, ZHU Zhongliang, ZHANG Jun
2021(2): 57-60. DOI: 10.19287/j.cnki.1005-2402.2021.02.010
Abstract PDF
Analysis of meshing contact of orthogonal arc tooth face-gear driver
ZHAO Yulong, GUO Jiping, GUO Zhenghua, SHENG Wei, CHEN Yong
2021(2): 61-65. DOI: 10.19287/j.cnki.1005-2402.2021.02.011
Abstract PDF
Research on design for manufacture of NC machining for aircraft structural parts
LIU Shi
2021(2): 66-69. DOI: 10.19287/j.cnki.1005-2402.2021.02.012
Abstract PDF
Study on the milling performance of self-fabricated cemented carbide tools in the machining process of titanium alloy
WU Chunya, WANG Guangzhou, LI Xiguang, QI Biao, CHEN Ni, CHEN Mingjun
2021(2): 70-75, 80. DOI: 10.19287/j.cnki.1005-2402.2021.02.013
Abstract PDF
Control algorithm for electromagnetic coil wire arrangement based on S-shaped curve
ZENG Shoujin, ZHOU Jiahui, YE Jianhua
2021(2): 76-80. DOI: 10.19287/j.cnki.1005-2402.2021.02.014
Abstract PDF
Study on chip removal mechanism and experimental study of single crystal superalloy materials in micro-milling
GAO Qi, GUO Guangyan, JIN Po
2021(2): 81-84. DOI: 10.19287/j.cnki.1005-2402.2021.02.015
Abstract PDF
Study on wear mechanism and optimum selection of vermicular graphite cast iron special milling cutter
AI Xiaonan, MA Wei, DING Ze, WANG Kun, ZHANG Lianjie, MENG Xiangdong
2021(2): 85-89. DOI: 10.19287/j.cnki.1005-2402.2021.02.016
Abstract PDF
Welding fixture for box structural parts
NIU Shuangmin
2021(2): 89-90. DOI: 10.19287/j.cnki.1005-2402.2021.02.017
Abstract PDF
The application of image recognition in bearing aperture diameter
LIANG Zhongyuan, ZHONG Peisi, LIU Pengwei, ZHANG Chao
2021(2): 91-95, 100. DOI: 10.19287/j.cnki.1005-2402.2021.02.018
Abstract PDF
Development of precision EDM machining fluid based on ELID grinding
GUAN Jialiang, GUO Kuichong, ZHANG Xiaohui, SHANG Haiyang, XU Zhenzhen, WANG Jianjie
2021(2): 96-100. DOI: 10.19287/j.cnki.1005-2402.2021.02.019
Abstract PDF
Error detection and data upload of probing system based on Siemens 840D sl CNC machine controller
TANG Zhi, ZI Wenliang
2021(2): 101-106. DOI: 10.19287/j.cnki.1005-2402.2021.02.020
Abstract PDF
Simulation of crack defect detection in the overlap area of double steel plates
XUE Huiling, QI Qingli, DU Wenhua
2021(2): 107-110. DOI: 10.19287/j.cnki.1005-2402.2021.02.021
Abstract PDF
Design and research of production line improvement for small and medium-sized manufacturing industry
WANG Jialin, SUN Jianghong
2021(2): 111-115. DOI: 10.19287/j.cnki.1005-2402.2021.02.022
Abstract PDF
Research on manufacturing resource allocation based on multi-objective optimization
WANG Youyuan, LIU Rui
2021(2): 115-119. DOI: 10.19287/j.cnki.1005-2402.2021.02.023
Abstract PDF
The research of tool management system for aerospace intelligent production line
ZHANG Suyan, ZHANG Ze, HE Wanlin, WU Xuesong, LIU Xin, LIU Zheng, ZHAO Hongjie, LUO Haiwei
2021(2): 120-124. DOI: 10.19287/j.cnki.1005-2402.2021.02.024
Abstract PDF
The influence of surface texture on three-lobe journal bearing
ZHANG Yang, CHEN Shujiang
2021(2): 125-130. DOI: 10.19287/j.cnki.1005-2402.2021.02.025
Abstract PDF
Physical design and engineering application of super-long cutter row of large vertical lathe
ZHANG Bin, GONG Li, SHENG Peng, XIE Longfei
2021(2): 131-133, 139. DOI: 10.19287/j.cnki.1005-2402.2021.02.026
Abstract PDF
Optical precise tool setting of ultra precision lathe based on CCD sensor and its application
SONG Yinghui, LIU Youhai, ZHANG Min, DAI Xiaojing, YANG Hong, CHEN Dongsheng
2021(2): 134-139. DOI: 10.19287/j.cnki.1005-2402.2021.02.027
Abstract PDF
Design of drilling and tapping fixture for mine explosion proof lamp radiator
XU Le, ZHU Yubin, CHEN Benzhuo, LANG Chaonan
2021(2): 140-142, 146. DOI: 10.19287/j.cnki.1005-2402.2021.02.028
Abstract PDF
Research and application of precision control technology for C axis of A/C double pendulum angel milling head
XIE Jingchao
2021(2): 143-146. DOI: 10.19287/j.cnki.1005-2402.2021.02.029
Abstract PDF
Dual NURBS curve fitting algorithm for five-axis interpolator
LI Hongshi, FAN Liuqun, ZHAO Jianhua, HUANG Yunying
2021(2): 147-150, 156. DOI: 10.19287/j.cnki.1005-2402.2021.02.030
Abstract PDF
Virtual commissioning for CNC machine tools based on NX MCD
LIN Yucheng, HAN Yong
2021(2): 151-156. DOI: 10.19287/j.cnki.1005-2402.2021.02.031
Abstract PDF