column
Research on numerical control machining parameters of aircraft engine casing
ZHANG Xinyun, WANG Zexiao, CAO Yan, DONG Jian, GENG Nan
2024(8): 9-15. DOI: 10.19287/j.mtmt.1005-2402.2024.08.001
Abstract PDF
Design of intelligent clean manufacturing line for torque converter housing
ZHANG Yanbin, SUN Lingyi, XU Shuaiqiang, ZHAO Yongjun, XU Wenhao, LI Changhe
2024(8): 16-25. DOI: 10.19287/j.mtmt.1005-2402.2024.08.002
Abstract PDF
Process analysis and economic evaluation of aero-engine blade grinding and polishing
WANG Xiaodong, YANG Qian, CHENG Sheng, ZHU Zhengqing
2024(8): 26-31. DOI: 10.19287/j.mtmt.1005-2402.2024.08.003
Abstract PDF
Design and analysis of rail-oriented automatic welding equipment
CAI Yang, YU Gongzhi
2024(8): 32-41. DOI: 10.19287/j.mtmt.1005-2402.2024.08.004
Abstract PDF
Research on short electric arc pulse discharge process of pure tungsten electrode under different air flow rates
LU Wenfeng, LI Xuezhi, WANG Bingbing, ZHANG Zhaoming, XIN Shaokun
2024(8): 42-48. DOI: 10.19287/j.mtmt.1005-2402.2024.08.005
Abstract PDF
Research on milling force in selective laser melting of titanium alloy milling
WANG Wei, JIN Chengzhe, WANG Junjie, LIU Wei
2024(8): 49-54. DOI: 10.19287/j.mtmt.1005-2402.2024.08.006
Abstract PDF
Microfine direct-write mask electrolytic processing of amorphous alloy planar microcoils
BI Jingxin, PENG Zilong, WANG Mengjie, ZHOU Shuai, LIU Zhonghao, LI Yinan
2024(8): 55-61. DOI: 10.19287/j.mtmt.1005-2402.2024.08.007
Abstract PDF
Analysis of the influence of creep behavior of laser cutting machine beam on processing accuracy
ZHANG Yu, LIN Yupei, SHU Lei, LI Tao, WANG Hao
2024(8): 62-67. DOI: 10.19287/j.mtmt.1005-2402.2024.08.008
Abstract PDF
Design and research on quantitative powder feed device for laser selective melting equipment
TANG Jianning, YANG Chunhong
2024(8): 68-71. DOI: 10.19287/j.mtmt.1005-2402.2024.08.009
Abstract PDF
Research on automatic alignment and focusing of tool damage visual detection system
HAO Ling, PAN Yi, HE Jianliang, MENG Linkun, WEI Yukang, WANG Yulin
2024(8): 72-77. DOI: 10.19287/j.mtmt.1005-2402.2024.08.010
Abstract PDF
Improving YOLOv5s PCB defect detection based on ECA and BiFPN
REN Jinxia, WU Jilin, WANG Jinrong
2024(8): 78-83. DOI: 10.19287/j.mtmt.1005-2402.2024.08.011
Abstract PDF
Visual inspection and automatic grinding system for sheet metal hole machining
JIN Zuohui, YI Jianye, XIE Hui
2024(8): 84-89. DOI: 10.19287/j.mtmt.1005-2402.2024.08.012
Abstract PDF
Visual evaluation of roundness error of shaft parts based on improved Zernike moments
LI Chang’an, YAN Yan, GAO Daxiao
2024(8): 90-96. DOI: 10.19287/j.mtmt.1005-2402.2024.08.013
Abstract PDF
Development and application of manufacturing execution system based on Visual Studio
WANG Linsen, WANG Cuntang, NIU Shouyin, WANG Haixia, LIU Qingsheng, LIU Yimei
2024(8): 97-104. DOI: 10.19287/j.mtmt.1005-2402.2024.08.014
Abstract PDF
Design study of automatic grinding machine for ITO target sintering pads
LAI Yuhuo, CHEN Rongzhi, LIN Weijian, HUANG Yinghuan
2024(8): 105-112. DOI: 10.19287/j.mtmt.1005-2402.2024.08.015
Abstract PDF
Analysis method for meshing misalignment of spiral bevel gear transmission system
XING Kan, YANG Hang, CHAI Baolian, ZHANG Weiqing
2024(8): 113-119. DOI: 10.19287/j.mtmt.1005-2402.2024.08.016
Abstract PDF
Research on compound control strategy of permanent magnet synchronous motor speed control system
LIN Ke, GAO Haiyan, CHEN Zhichao
2024(8): 120-126, 142. DOI: 10.19287/j.mtmt.1005-2402.2024.08.017
Abstract PDF
Multi motor synchronous control method based on model feedforward for internal force loading mechanism
YIN Jun, CHEN Hua, LI Xiang, SHI Yingtuo
2024(8): 127-131. DOI: 10.19287/j.mtmt.1005-2402.2024.08.018
Abstract PDF
Two-degree-of-freedom speed control strategy on flexible driving system
ZHANG Guoguang, XIE Shuntai, LIU Wenlong, ZHENG Xiaobin
2024(8): 132-137. DOI: 10.19287/j.mtmt.1005-2402.2024.08.019
Abstract PDF
Influence of process parameters on the surface roughness of Al6063 diamond wire cut under non-lubricated conditions
GAO Yonghua, LV Han, DU Chang, WU Sheng, LI Shipeng, QIN Xuda
2024(8): 138-142. DOI: 10.19287/j.mtmt.1005-2402.2024.08.020
Abstract PDF
Milling analysis and optimization of process parameters for Inconel 718 additively formed parts
ZHANG Le, BAI Haiqing, ZHANG Yi, JIA Zongqiang, ZHOU Jun, REN Zekang
2024(8): 143-149. DOI: 10.19287/j.mtmt.1005-2402.2024.08.021
Abstract PDF
Research on assembly sequence planning technology based on improved artificial bee colony algorithm
WANG Yanyan, ZHANG Chunyan, WU Bo, CHENG Dejun
2024(8): 150-157. DOI: 10.19287/j.mtmt.1005-2402.2024.08.022
Abstract PDF
Study on visualization of the measurement results for “S” shape specimen and its software development
LIU Fumin, GAO Cheng, FENG Changzheng
2024(8): 158-168. DOI: 10.19287/j.mtmt.1005-2402.2024.08.023
Abstract PDF
Development and practice of digital twin system for experimental center
CHU Yizhe, ZHOU Zhifeng, CHEN Guoling, LI Wenjie
2024(8): 169-174. DOI: 10.19287/j.mtmt.1005-2402.2024.08.024
Abstract PDF
Thermal error prediction of machine tool spindle of GWOA-BiLSTM based on thermal image
ZHANG Wanjun, CHEN Yao, HAN Yue, WU Hongyi, WANG Jianchen, DENG Xiaolei
2024(8): 175-181. DOI: 10.19287/j.mtmt.1005-2402.2024.08.025
Abstract PDF
CNC machine tool FMECA reliability analysis method based on fuzzy VIKOR
CUI Yingjie, WANG Junjian, ZHAO Qinzhi, HU Yu, WEN Mengfei
2024(8): 182-186, 194. DOI: 10.19287/j.mtmt.1005-2402.2024.08.026
Abstract PDF
Improved YOLOv8 metal surface defect detection model
LONG Yang, XIAO Xiaoling
2024(8): 187-194. DOI: 10.19287/j.mtmt.1005-2402.2024.08.027
Abstract PDF
Servo system cogging torque compensation and encoder calibration technology based on adaptive feedforward cancellation
DING Xinzhong, CHU Chengbing
2024(8): 195-199. DOI: 10.19287/j.mtmt.1005-2402.2024.08.028
Abstract PDF