column
A lightweight rolling bearing fault diagnosis method based on improved EfficientNet model
DAI Yingyu, LI Jingchao, ZHAO Ying, LIU Yanli, WANG Shenhua, ZHANG Bin
2024(9): 9-15. DOI: 10.19287/j.mtmt.1005-2402.2024.09.001
Abstract PDF
Bearing fault diagnosis based on MCNN-LSTM and cross entropy loss function
HU Mengting, LUO Chen
2024(9): 16-22. DOI: 10.19287/j.mtmt.1005-2402.2024.09.002
Abstract PDF
Fault intelligent identification method for axial piston pump using multi-subarray acoustical signal
WANG Changlin, SUN Junjie, ZHONG Yongteng
2024(9): 23-28. DOI: 10.19287/j.mtmt.1005-2402.2024.09.003
Abstract PDF
Improved obstacle avoidance path planning of the RRT* algorithm robotic arm
SHI Gaojian, WANG Xinwei, LIU Qiang, MU Li, HE Jiayi
2024(9): 29-35. DOI: 10.19287/j.mtmt.1005-2402.2024.09.004
Abstract PDF
Identification and compensation method for gravity error of 6-DOF robot
REN Lijuan, CHEN Ke, YAN Weijian, LI Kun, YU Dianming, ZHANG Guangpeng
2024(9): 36-42. DOI: 10.19287/j.mtmt.1005-2402.2024.09.005
Abstract PDF
Research on programming technology for robot grinding of aerospace structural parts
LI Renzheng, SONG Ge, GAO Xin, QIN Xiaopin, LIU Shaorui, ZHAO Guobo
2024(9): 43-51. DOI: 10.19287/j.mtmt.1005-2402.2024.09.006
Abstract PDF
Kinematics and error analysis of 3PRS parallel mechanism
ZHOU Wentao, XIE Wenhong, LI Chuye, LI Zhongkai
2024(9): 52-57. DOI: 10.19287/j.mtmt.1005-2402.2024.09.007
Abstract PDF
Simulation and experiment of ultrasonic vibration assisted milling of TC4 titanium alloy with PCD tool
ZHU Lidong, LIU Xiaofeng
2024(9): 58-64. DOI: 10.19287/j.mtmt.1005-2402.2024.09.008
Abstract PDF
Study on the formation process of arc and cratering with electrode materials
LU Wenfeng, LI Xuezhi
2024(9): 65-70. DOI: 10.19287/j.mtmt.1005-2402.2024.09.009
Abstract PDF
Preparation process and experimental study of laser cladding WC-12Co gradient coating on M2 high-speed steel surface
GUO Haihua, CHEN Xiang, LI Jinhua, YAO Fangping, WANG Tianci
2024(9): 71-78. DOI: 10.19287/j.mtmt.1005-2402.2024.09.010
Abstract PDF
Research progress on clean sustainable cutting and multi-objective optimization of process parameters
LI Wei, ZHENG Guangming, DING Feng, WANG Wenbo, ZHANG Junfeng
2024(9): 79-85. DOI: 10.19287/j.mtmt.1005-2402.2024.09.011
Abstract PDF
Research on chamfering method of cylindrical gear tooth profile based on rotational indexing machining
LIU Wenqian, ZHANG Weiqing
2024(9): 86-91. DOI: 10.19287/j.mtmt.1005-2402.2024.09.012
Abstract PDF
Research on digital twin consistency of CNC machine tools based on improved ANP-MD
SUN Li, JIAO Ziyiming, WU Jinhui
2024(9): 92-96. DOI: 10.19287/j.mtmt.1005-2402.2024.09.013
Abstract PDF
Multi-objective optimization of stepped rail column in horizontal machining center based on genetic algorithm
ZHOU Xuepeng, DAI Yuhong, LI Ke, REN Huiling, WANG Nannan, REN Guoxi, CHENG Hongli
2024(9): 97-104. DOI: 10.19287/j.mtmt.1005-2402.2024.09.014
Abstract PDF
Research on large-format stitching light curing 3D printers
LI Jian, YANG Jinbo, ZHAO Wen
2024(9): 105-112. DOI: 10.19287/j.mtmt.1005-2402.2024.09.015
Abstract PDF
Research on the manufacturing technology of complex precision radiators
PENG Zejun, HAN Ya, GAO Guicun
2024(9): 113-119. DOI: 10.19287/j.mtmt.1005-2402.2024.09.016
Abstract PDF
Active disturbance rejection control of permanent magnet synchronous motor based on improved faln function
SUN Tianqi, LI Bo, WEI Qingkun, SONG Yadong, TAN Cao
2024(9): 120-124. DOI: 10.19287/j.mtmt.1005-2402.2024.09.017
Abstract PDF
Research on starting technology of PMSM in rotating state based on anti vibration sliding mode observer
YI Jianhui, TIAN Jiudong, JIAO Liye, WANG Peng, LI Liangjing
2024(9): 125-131. DOI: 10.19287/j.mtmt.1005-2402.2024.09.018
Abstract PDF
Machinability study and process optimization of drilling and milling in two types of CFRP plates
WANG Yinghui, ZHU Kun, YOU Yuan, GE Laiyuan
2024(9): 132-141. DOI: 10.19287/j.mtmt.1005-2402.2024.09.019
Abstract PDF
Experimental study on grinding of 16Cr3NiWMoVNbE carbonitriding steel
SHI Feng, LIU Fang, SONG Tiejun, ZHANG Gaofeng, YIN Sheng
2024(9): 142-146. DOI: 10.19287/j.mtmt.1005-2402.2024.09.020
Abstract PDF
Research on grinding contact stiffness and its process correlation analysis
FENG Keming, ZHAO Jinzhui, DU Xiaoxu
2024(9): 147-154. DOI: 10.19287/j.mtmt.1005-2402.2024.09.021
Abstract PDF
The study of conversion of process dimensions for space angle boring based on analytical method
YANG Huan, JU Luyan, SUN Ruowen, ZHANG Weikun, ZHANG Yaowu, GUO Longlong
2024(9): 155-160. DOI: 10.19287/j.mtmt.1005-2402.2024.09.022
Abstract PDF
Research on digital measurement method for airborne duct
YUE Jun, LIU Shutong, AN Jianlong, LIU Min, CHEN Naihua
2024(9): 161-166. DOI: 10.19287/j.mtmt.1005-2402.2024.09.023
Abstract PDF
Analysis of viscous damping on the machining chatter of thin-walled parts
HOU Junming, WANG Baosheng, HAO Hongyan
2024(9): 167-172. DOI: 10.19287/j.mtmt.1005-2402.2024.09.024
Abstract PDF
Research on optimization of temperature measurement points for linear feed axis of CNC machine tools
YANG Tongtong, SUN Xingwei, YANG Heran, LIU Yin, ZHAO Hongxun, ZHANG Weifeng
2024(9): 173-180. DOI: 10.19287/j.mtmt.1005-2402.2024.09.025
Abstract PDF
Application of improved honey badger algorithm and neural network in CLSP
DONG Hai, JING Lihui
2024(9): 181-188. DOI: 10.19287/j.mtmt.1005-2402.2024.09.026
Abstract PDF
Production process optimization of X product based on value stream analysis
ZHOU Chunliu, YAO Wei, TIAN Yan, ZHANG Hongliang, SHI Sikui
2024(9): 189-199. DOI: 10.19287/j.mtmt.1005-2402.2024.09.027
Abstract PDF