column
Overview of magnetic blank holder method in deep drawing
ZHANG Hongsheng, CAO Liqin, GUO Kai
2021(10): 7-13. DOI: 10.19287/j.cnki.1005-2402.2021.10.001
Abstract PDF
Design of robot laser cutting system for small hole
XIA Zixiang, CUI Xiangfu, ZHANG Li
2021(10): 14-17. DOI: 10.19287/j.cnki.1005-2402.2021.10.002
Abstract PDF
Application of the deepen arc technology in thick plate welding of carbon steel
WANG Xingyang
2021(10): 18-20. DOI: 10.19287/j.cnki.1005-2402.2021.10.003
Abstract PDF
Path planning of welding robot based on changing step fruit fly optimization algorithm
NIE Fen, ZHAO Zhihua
2021(10): 21-25. DOI: 10.19287/j.cnki.1005-2402.2021.10.004
Abstract PDF
Research progress on grinding mechanism of hard and brittle materials
WANG Long, WANG Liuying, TANG Xiujian, YUAN Xiaojing, WANG Youcai, YOU Yinfeng
2021(10): 26-31. DOI: 10.19287/j.cnki.1005-2402.2021.10.005
Abstract PDF
Structural optimization design of a mobile drilling and milling equipment base
CHEN Hongchang, ZHANG Shizhen
2021(10): 31-34. DOI: 10.19287/j.cnki.1005-2402.2021.10.006
Abstract PDF
Design and application of gear cutting method with conical end milling cutter
LU Lili, CHEN Jiahui
2021(10): 35-39. DOI: 10.19287/j.cnki.1005-2402.2021.10.007
Abstract PDF
Research on three-dimensional tooth contact analysis for spiral bevel and hypoid gear drives
LI Jingcai, HUO Jinhai, MAN Jia, WANG Peng
2021(10): 40-44. DOI: 10.19287/j.cnki.1005-2402.2021.10.008
Abstract PDF
Distribution model and optimization design of cluster magnetorheological field
LU Mingming, ZHUANG Xulong, ZHOU Jiakang, LIN Jieqiong, LI Weixing
2021(10): 45-49. DOI: 10.19287/j.cnki.1005-2402.2021.10.009
Abstract PDF
Influence of MS type chipbreaker retaining wall on turning force and parameter optimization
CHEN Shunqing, LU Wenbin
2021(10): 50-54. DOI: 10.19287/j.cnki.1005-2402.2021.10.010
Abstract PDF
Research on the processing technology of the case of a weapon subsystem
PENG Daiqiang, ZHANG Jian, ZHU Wenbing, DU Jincheng, WANG Yanjun
2021(10): 55-57. DOI: 10.19287/j.cnki.1005-2402.2021.10.011
Abstract PDF
Research on surface integrity and wear resistance of high speed hard milled surface of die steel
HAO Jun
2021(10): 58-61. DOI: 10.19287/j.cnki.1005-2402.2021.10.012
Abstract PDF
Numerical control machining technology of complex thin-walled heat exchanger parts
HAN Jun, XIONG Fengsheng, YAO Sheng, XU Rui
2021(10): 62-66, 72. DOI: 10.19287/j.cnki.1005-2402.2021.10.013
Abstract PDF
Reliability modeling and assessment on bottom dead center precision of high-speed punch machine with individual difference
CHEN Hao, ZHANG Wei
2021(10): 67-72. DOI: 10.19287/j.cnki.1005-2402.2021.10.014
Abstract PDF
Research on short-term capability evaluation model and application of machine tool processing
HUANG Zuguang, GUAN Pengting, XUE Ruijuan, WANG Jinjiang, XU Haoli
2021(10): 73-78. DOI: 10.19287/j.cnki.1005-2402.2021.10.015
Abstract PDF
Workpiece recognition based on improved Tiny-YOLOv3 algorithm
SU Weicheng, LIANG Hongbin, FENG Guang
2021(10): 78-83. DOI: 10.19287/j.cnki.1005-2402.2021.10.016
Abstract PDF
Characterization of the texture characteristics of the machined surface image based on RULBP and GLCM
YUAN Jun, LIU Libing, CHEN Yingshu, YANG Zeqing, ZHANG Yanrui, FENG Kai
2021(10): 84-89. DOI: 10.19287/j.cnki.1005-2402.2021.10.017
Abstract PDF
An evaluation method for bottom edge wear of vertical milling tool based on equivalent plane wear area
SHENG Jing, WANG Zhimin, YI Liao, XU Jianmin
2021(10): 90-96. DOI: 10.19287/j.cnki.1005-2402.2021.10.018
Abstract PDF
Design of automatic measuring fixture for inner and outer free-form surface of a disk-shaped workpiece
TAN Jun, ZHU Yuanqing, WANG Delong
2021(10): 97-99. DOI: 10.19287/j.cnki.1005-2402.2021.10.019
Abstract PDF
Prediction model and experimental study of micro-hole drilling force based on micro-cutting theory
KOU Xiaochen, ZHANG Lei, MIAO Lili
2021(10): 100-104. DOI: 10.19287/j.cnki.1005-2402.2021.10.020
Abstract PDF
Research on station layout optimization of job shop balancing problem
ZHANG Bangcheng, XIA Qi, LU Guanhong, PENG Qifei, ZHANG Ziqiang
2021(10): 105-109. DOI: 10.19287/j.cnki.1005-2402.2021.10.021
Abstract PDF
Optimizing of time delay for multi-cluster tools
PAN Chunrong, LONG Zhiqiang
2021(10): 109-113. DOI: 10.19287/j.cnki.1005-2402.2021.10.022
Abstract PDF
Modeling and optimization of flexible job shop scheduling problem with multiple time and machine efficiency
LIANG Xiaolei, MA Qianhui, LI Zhanghong, LIU Xingyu, ZHANG Mengdi
2021(10): 114-122. DOI: 10.19287/j.cnki.1005-2402.2021.10.023
Abstract PDF
Research on mechanical equipment fault feature extraction method based on CEEMD and RobustICA
YANG Jingzong, SHI Chunchao, YANG Tianqing, WU Limei
2021(10): 123-127. DOI: 10.19287/j.cnki.1005-2402.2021.10.024
Abstract PDF
The design and implementation of a cylinder clamp for production line
QI Yan, WANG Tao, KANG Xiying
2021(10): 128-132, 139. DOI: 10.19287/j.cnki.1005-2402.2021.10.025
Abstract PDF
Research on feedback linearization control of linear magnetic suspension synchronous motor for CNC machine
SUN Yunpeng, LAN Yipeng, XU Zelai, LEI Cheng
2021(10): 133-139. DOI: 10.19287/j.cnki.1005-2402.2021.10.026
Abstract PDF
Research on key technology of contour compensation based on cross coupling of parameter self adjustment
ZHANG Wanjun, ZHANG Feng, ZHANG Wanliang, ZHANG Jingxuan, ZHANG Jingyi, ZHANG Jingyan
2021(10): 140-145. DOI: 10.19287/j.cnki.1005-2402.2021.10.027
Abstract PDF
An adaptive tool compensation adjustment method for large shell NC milling process
ZHANG Ze, LIU Zheng, ZHAO Hongjie, HE Wanlin, DENG Yang, LI Lu
2021(10): 145-149. DOI: 10.19287/j.cnki.1005-2402.2021.10.028
Abstract PDF